GARO ENTITY PRO, Installation And Operation Manual

Page: 56 / 102

20. Configure the settings in the GARO Connect app.
Scan the QR code on the load interface.
21. Test the load management setup to ensure that the
current is limited at high load conditions.
Testing the DLM:
The first step is always to verify that the measured
DLM current is correct. Check the energy meter or
other current meter.
Testing a DLM system can be challenging. A small
installation at a private home, with 1 charging
station and 1 load interface is usually easy to verify.
An example is charging an EV while using heavy
electric consumer equipment in the house (the stove,
water heaters). Larger sites are more complex to
verify and may require many EVs. A possibility is to
temporary adjust the DLM limit current down to a
level that is more "possible" to affect by whatever
loads that can be used.
4.14 GARO CONNECT
4.14.1 THE GARO CONNECT APP
The GARO connect app is to be used for the
installation, management and operation of the GARO
Entity charging station. The instructions in this manual
are intended as an overview of the setup and functions
of the GARO Connect app.
The GARO Connect app can be downloaded from
Google Play or App store on a digital device. Register
as a new user in the GARO Connect app. Use an e-mail
address as usename.
GARO
Connect
56 Version: 1.3
Installation