Garmin MARQ DRIVER, Owner'S Manual

Page: 41 / 52

• Select Always to use your foot pod data regardless of the
GPS setting.
tempe ™
The tempe is an ANT+ wireless temperature sensor. You can
attach the sensor to a secure strap or loop where it is exposed
to ambient air, and therefore, provides a consistent source of
accurate temperature data. You must pair the tempe with your
device to display temperature data from the tempe.
Device Information
Specifications
Battery type Rechargeable, built-in lithium-ion battery
Battery life Up to 12 days (smartwatch mode with activity
tracking and 24/7 wrist-based heart rate
monitoring)
Water rating 10 ATM*
Operating and storage
temperature range From -20º to 45ºC (from -4º to 113ºF)
Charging temperature
range From 0º to 45ºC (from 32º to 113ºF)
Wireless frequencies/
protocols 2.4 GHz @ 19 dBm nominal, 13.56 MHz @
-36 dBm nominal
*The device withstands pressure equivalent to a depth of 100 m.
For more information, go to www.garmin.com/waterrating .
Battery Information
The actual battery life depends on the features enabled on your
device, such as activity tracking, wrist-based heart rate,
smartphone notifications, GPS, internal sensors, and connected
sensors.
Battery Life Mode
Up to 12 days Smartwatch mode with activity tracking and 24/7 wrist-
based heart rate monitoring
Up to 28 hours GPS mode with wrist-based heart rate
Up to 9 hours GPS mode with wrist-based heart rate and streaming
music
Up to 48 hours UltraTrac GPS mode with gyro-based dead reckoning
(with wrist-based heart rate monitoring turned off)
Data Management
NOTE: The device is not compatible with Windows 95, 98, Me,
Windows NT ® , and Mac ® OS 10.3 and earlier.
Deleting Files
NOTICE
If you do not know the purpose of a file, do not delete it. Your
device memory contains important system files that should not
be deleted.
1 Open the Garmin drive or volume.
2
If necessary, open a folder or volume.
3
Select a file.
4
Press the Delete key on your keyboard.
NOTE: Mac operating systems provide limited support for
MTP file transfer mode. You must open the Garmin drive on
a Windows operating system. You should use the Garmin
Express application to remove music files from your device.
Device Maintenance
Device Care
NOTICE
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals. Prolonged exposure to these substances can
damage the case.
Avoid pressing the keys under water.
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Cleaning the Device
NOTICE
Even small amounts of sweat or moisture can cause corrosion
of the electrical contacts when connected to a charger.
Corrosion can prevent charging and data transfer.
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.
After cleaning, allow the device to dry completely.
TIP: For more information, go to www.garmin.com/fitandcare .
Changing Integrated QuickFit
®
Accessories
1
Pull to open the latch, and remove the integrated QuickFit
strap or bracelet from the watch.
2
Pull to open the latch on the integrated strap or bracelet, and
align it with the watch.
3 Close the latch over the watch pin.
NOTE: Make sure the strap or bracelet is secure. There
should be a small gap between the latch and the strap or
bracelet.
Device Information 35