Garmin MARQ DRIVER, Owner'S Manual

Page: 38 / 52

3
Select an option:
• To calibrate automatically from your GPS starting point,
select Auto Cal. , and select an option.
• To enter the current elevation, select Calibrate .
Barometer Settings
Hold MENU , and select Sensors & Accessories > Barometer .
Calibrate : Allows you to manually calibrate the barometer
sensor.
Plot : Sets the time scale for the chart in the barometer widget.
Storm Alert : Sets the rate of barometric pressure change that
triggers a storm alert.
Watch Mode : Sets the sensor used in watch mode. The Auto
option uses both the altimeter and barometer according to
your movement. You can use the Altimeter option when your
activity involves changes in altitude, or the Barometer option
when your activity does not involve changes in altitude.
Pressure : Sets how the device displays pressure data.
Calibrating the Barometer
Your device was already calibrated at the factory, and the
device uses automatic calibration at your GPS starting point by
default. You can manually calibrate the barometer if you know
the correct elevation or the correct sea level pressure.
1
Hold MENU .
2
Select Sensors & Accessories > Barometer > Calibrate .
3
Select an option:
• To enter the current elevation or sea level pressure, select
Yes .
• To calibrate automatically from the digital elevation model,
select Use DEM .
• To calibrate automatically from your GPS starting point,
select Use GPS .
Xero Location Settings
Hold MENU , and select Sensors & Accessories > XERO
Locations .
Status : Enables the display of laser location information from a
compatible, paired Xero device.
Share Mode : Allows you to share laser location information
publicly or broadcast it privately.
Map Settings
You can customize how the map appears in the map app and
data screens.
Hold
MENU , and select Map .
Orientation : Sets the orientation of the map. The North Up
option shows north at the top of the screen. The Track Up
option shows your current direction of travel at the top of the
screen.
User Locations : Shows or hides saved locations on the map.
Auto Zoom : Automatically selects the zoom level for optimal
use of your map. When disabled, you must zoom in or out
manually.
Lock on Road : Locks the position icon, which represents your
position on the map, onto the nearest road.
Track Log : Shows or hides the track log, or the path you have
traveled, as a colored line on the map.
Track Color : Changes the track log color.
Detail : Sets the amount of detail shown on the map. Showing
more detail may cause the map to redraw more slowly.
Marine : Sets the map to display data in marine mode ( Marine
Map Settings , page 32 ).
Draw Segments : Shows or hides segments, as a colored line
on the map.
Draw Contours : Shows or hides contour lines on the map.
Marine Map Settings
You can customize how the map appears in marine mode.
Hold
MENU , and select Map > Marine .
Marine Chart Mode : Enables the nautical chart when displaying
marine data. This option displays various map features in
different colors so the marine POIs are more readable, and
so the map reflects the drawing scheme of paper charts.
Spot Soundings : Enables depth measurements on the chart.
Light Sectors : Shows and configures the appearance of light
sectors on the chart.
Symbol Set : Sets the chart symbols in marine mode. The
NOAA option displays the National Oceanic and Atmospheric
Administration chart symbols. The International option
displays the International Association of Lighthouse
Authorities chart symbols.
Showing and Hiding Map Data
If you have multiple maps installed on your device, you can
choose the map data to show on the map.
1
Select START > Map .
2
Hold MENU .
3
Select the map settings.
4
Select Map > Configure Maps .
5
Select a map to activate the toggle switch, which shows or
hides the map data.
Navigation Settings
You can customize the map features and appearance when
navigating to a destination.
Customizing Map Features
1
Hold MENU .
2
Select Navigation > Data Screens .
3 Select an option:
• Select
Map to turn on or off the map.
• Select Guide to turn on or off the guide screen that
displays the compass bearing or course to follow while
navigating.
• Select Elevation Plot to turn on or off the elevation plot.
• Select a screen to add, remove, or customize.
Setting Up a Heading Bug
You can set up a heading indicator to display on your data
pages while navigating. The indicator points to your target
heading.
1
Hold MENU .
2
Select Navigation > Heading Bug .
Setting Navigation Alerts
You can set alerts to help you navigate to your destination.
1
Hold MENU .
2
Select Navigation > Alerts .
3 Select an option:
• To set an alert for a specified distance from your final
destination, select Final Distance .
• To set an alert for the estimated time remaining until you
reach your final destination, select Final ETE .
• To set an alert when you stray from the course, select Off
Course .
• To enable turn-by-turn navigation prompts, select Turn
Prompts .
4
If necessary, select Status to turn on the alert.
32 Customizing Your Device