Garmin GPSMAP1222, Owner'S Manual, Page: 191 / 214

NMEA 2000 Settings
Select > Communications > NMEA 2000 Setup.
Device List: Displays the devices connected to the network and allows you to set options for some transducers
connected using the NMEA 2000 network.
Label Devices: Changes the labels for available connected devices.
Naming Devices and Sensors on the Network
You can name devices and sensors connected to the Garmin Marine Network and the NMEA 2000 network.
1 Select
> Communications.
2 Select Marine Network or NMEA 2000 Setup > Device List.
3 Select a device from the list on the left.
4 Select Change Name.
5 Enter the name, and select Done.
The Garmin BlueNet Network and the Legacy Garmin Marine Network
The Garmin BlueNet network allows you to share data from Garmin peripheral devices with chartplotters quickly
and easily. You can connect compatible devices using Garmin BlueNet technology to receive data from and
share data with other connected devices and chartplotters.
There are two types of network technology used by Garmin marine devices. The legacy Garmin Marine Network
technology has larger connectors and has been in use for many years. The newer Garmin BlueNet network
technology has smaller connectors and is capable of higher speeds than the previous network technology. You
can connect Garmin Marine Network devices to Garmin BlueNet devices to share data with one another when
the network is structured properly. For more information, see
garmin.com/manuals/bluenet .
You can view all of the devices connected to the Garmin BlueNet network and add or change a custom name for
each device.
Select
> Communications > BlueNet™ Network or Marine Network.
Setting Alarms
CAUTION
The Beeper setting must be turned on to make alarms audible ( Sounds and Display Settings, page 171 ). Failure
to set audible alarms could lead to injury or property damage.
Navigation Alarms
Select > Alarms > Navigation.
Arrival: Sets an alarm to sound when you are within a specified distance or time from a turn or a destination.
Anchor Drag: Sets an alarm to sound when you exceed a specified drift distance while anchored.
WARNING
The anchor drag alarm is a tool for situational awareness only and may not prevent groundings or collisions in
all circumstances. You are responsible for the safe and prudent operation of your vessel, for remaining aware of
your surroundings, and for using safe judgment on the water at all times.
Off Course: Sets an alarm to sound when you are off course by a specified distance.
Boundary Alarms: Disables and enables all boundary alarms.
Device Configuration 177