Garmin GPSMAP 695, Owner'S Manual, Page: 167 / 210

Garmin GPSMAP 695/696 Owner’s Manual 190-00919-00 Rev. D
appendix d
153
Overview
GPS Navigation
Flight Planning
Hazar
d
Avoidance
Additional F
eatur
es
Appendices
Index
Setting NMEA output mode:
1) Press the MENU Key twice to select the Main Menu.
2)
Turn or move the
FMS
Joystick to select ‘System Setup’, and press the
ENT
Key.
3)
Turn or move the
FMS
Joystick to select ‘Interface’, and press the
ENT
Key.
4)
With the ‘Serial Data Format’ field highlighted, turn the
FMS
Joystick to
select ‘NMEA In/Out’.
5)
Move the
FMS
Joystick to highlight the ‘NMEA Output Mode’ field.
6)
Turn the
FMS
Joystick to select ‘Normal’ or ‘Fast’.
NMEA Sentence Output:
Normal Mode: GPRMB, GPRMC, GPGGA, GPGSA, GPGSV, GPGLL, GPBWC, •
GPVTG, GPXTE, GPBOD, GPRTE, GPWPL, GPAPB, PGRME, PGRMZ, PGRMM,
and PGRMH.
Fast Mode: GPRMB, GPRMC, PGRMZ, and PGRMH. •
tis i
nterFAce
s
etUp
Configuring TIS input:
1)
Press the
MENU
Key twice to select the Main Menu.
2)
Turn or move the
FMS
Joystick to select ‘System Setup’, and press the
ENT
Key.
3)
Turn or move the
FMS
Joystick to select ‘Interface’, and press the
ENT
Key.
4)
With the ‘Serial Data Format’ field highlighted, turn the FMS Joystick to
select ‘TIS In’
or TIS In/NMEA & VHF Out
.
The TIS Status field indicates one of the following messages:
Waiting For Data—searching for a valid TIS data stream. •
Data Available—receiving TIS data from the transponder. •
Data Unavailable—connection to transponder established, but TIS service is •
unavailable.
Lost Connection—an error occurred or the connection to the transponder was
•
lost.