Garmin GPSMAP 695, Owner'S Manual

Page: 166 / 210

Garmin GPSMAP 695/696 Owner’s Manual 190-00919-00 Rev. D
appendix d
152
Overview
GPS Navigation
Flight Planning
Hazar
d
Avoidance
Additional F
eatur
es
Appendices
Index
Interface Setup (Main Menu)
s
eriAl
d
AtA
F
ormAts
Garmin Data Transfer—the proprietary format used to exchange data with a PC or •
another Garmin GPSMAP 695/696.
NMEA In/ • NMEA Out—transmits NMEA position, velocity, and navigation data.
Aviation In—the proprietary format used for connection to a Garmin panel- •
mounted GPS receiver. This eliminates the need to enter the destination on both
units.
Aviation In/NMEA & VHF Out—receives aviation data and transmits out both •
NMEA data, at 9600 baud, and VHF frequency tuning information to a Garmin
Nav/Comm radio.
TIS In—receives TIS data from a Garmin Mode S transponder or other compatible •
device.
TIS In/NMEA & VHF Out—receives TIS data and transmits out both NMEA data, at •
9600 baud, and VHF frequency tuning information to a Garmin Nav/Comm radio.
None—provides no interfacing capabilities. •
A
dvAnced
nmeA o
UtpUt
s
etUp
If interfacing the GPSMAP 695/696 with another piece of equipment (such as an
autopilot), the unit needs to be set to output NMEA data. If the NMEA output mode is
set to ‘Fast’, the unit will output a minimum number of NMEA sentences at 1-second
intervals. If the NMEA output is set to ‘Normal’, the unit will output a greater number
NMEA sentences as 2-second intervals.