Garmin GPSMAP 695, Owner'S Manual

Page: 163 / 210

Garmin GPSMAP 695/696 Owner’s Manual 190-00919-00 Rev. D
appendix d
149
Overview
GPS Navigation
Flight Planning
Hazar
d
Avoidance
Additional F
eatur
es
Appendices
Index
5)
With the Serial Data Format field highlighted, turn the FMS Joystick to
select ‘TIS In/NMEA & VHF Out’ or ‘Aviation In/NMEA & VHF Out’. These
comm modes send both NMEA data and VHF frequency information.
The following features are now available on the radio:
Remote frequency lists for departure, enroute, and arrival airports. •
Nearest VOR frequencies (SL30 only). •
The GPSMAP 695/696 can also directly tune a standby frequency.
Selecting a standby comm frequency:
1)
Enter an airport identifier on the Waypoint Page.
2) Move the FMS Joystick to the ‘Frequencies’ Box.
3) With the desired frequency selected, press the ENT Key. The frequency is
now tuned in standby.
cONNectiNG tO a cOMPuter
Your GPSMAP 695/696 can be connected to your computer using the included USB-
PC Interface Cable to connect to a USB data port.
Connecting to a computer:
1) Connect the small end of your cable to the connector on the left side of the
GPSMAP 695/696.
2) When using the supplied USB Data Cable, connect the larger end of the
cable to an available USB data port.
iNFOrMatiON aBOut uSB driverS
When connecting the GPSMAP 695/696 to a USB port, the computer prompts you to
locate the destination of the drivers for the device (a USB drivers CD is included). Only
install the drivers once. After the drivers are installed, your computer always detects
your GPSMAP 695/696 when it is connected. USB driver updates can be found at
www.garmin.com.