6
GPSMAP 3206/3210 Owner’s Manual
u
sIng
r
adar
>
r
adar
P
age
r
adar
Acqurng target
Dangerous target
Safe
targets
To view the MARPA List:
Press the
MARPA List
soft key.
Enter Standby (Begin Transmitting)
The
Enter Standby
(
Begin Transmitting
) option allows you to select whether
the radar is in Standby Mode or is transmitting. Select
Enter Standby
to place
the radar into Standby Mode. While in Standby Mode, the radar does not transmit,
but power remains applied to the Magnetron. Select
Begin Transmitting
to
remove the radar from Standby mode. After the radar completes “Spinning Up”,
the radar begins transmitting.
Set Motor to High Speed (Set Motor to Normal Speed)
The
Set Motor to high Speed
(
Set Motor to Normal Speed
) option allows you
to select the motor speed of the GMR 404/406 radar. Selecting
Set Motor to
high Speed
to increases the speed at which the radar rotates, thus increasing the
speed at which the screen updates.
NOTE:
This option is available only if you are using a GMR 404/406 radar.
