GPSMAP 3206/3210 Owner’s Manual
u
sIng
r
adar
>
r
adar
P
age
r
adar
Guard Zone
A Guard Zone is a user-defined area of protection. If a target enters the Guard
Zone, an alarm sounds. You can define two Guard Zones. The Guard Zone Menu
has two areas, “Guard Zone 1” and “Guard Zone 2.” Each area has two settings,
Show (hide)
and
Adjust
.
Guard Zone
To Define a Guard Zone:
1. Highlight
Show Guard Zone 1 or 2,
and press
ENTER
.
2. Highlight
Adjust
,
and press
ENTER
.
3. Using the
ROCKER,
define the area on the Radar Page.
4. Press
ENTER
to set the Guard Zone.
VRM/EBL
The (Variable Range Marker (VRM) and Electronic Bearing Line (EBL) tools
measure range and bearing to a target. You can move the center point of the
VRM, which allows you to measure from one target to another. Two
VRM/EBL tools can be active at the same time.
The VRM/EBL option has two areas, VRM/EBL 1 and VRM/EBL 2. Each area
has two settings,
Show
(
hide
) and
Adjust
.
Varable Range Marker
(VRM)
Electronc Bearng Lne
(EBL)
To start VRM/EBL 1 or VRM/EBL 2:
On the Radar Adjustment menu, highlight Show
VRM/EBL 1 or
VRM/EBL 2
, and then press
ENTER
.
You can adjust the diameter of the VRM and the angle of the EBL.
