background image

63

GETTING START-

ED

Using the GOTO

Key

GOTO Options

The GOTO options menu provides a list of additional GOTO options that let

you start a TracBack route, select a destination waypoint from the nearest way-
points list, select a route to navigate, or cancel the current GOTO destination.

To display the GOTO options menu from any page:

1. Press 

G

followed by 

O

To select a menu option:

1. Highlight the desired option and press 

T

.

The following options are available:

• Start  TracBack?:

Allows you to create and start navigation of a TracBack route

back to the oldest track log point in memory (see pages 64-65 for more on using
the TracBack feature.)

• Show All Wpts?:

Displays the GOTO waypoint list.

• Show Nearest Waypoints?:

Allows you to select the GOTO destination from a list

of the nine nearest waypoints to your present position.

To select a nearest waypoint as a GOTO destination:

1. Highlight the ‘Show Nearest Waypoints’ option and press 

T

.

2. Select the desired waypoint and press 

T

.

• Select Route?:

Allows you to quickly select a stored route for navigation.

To select a route to navigate:

1. Highlight the ‘Select Route’ option and press 

T

.

2. Select the desired route and press 

T

.

• Cancel GOTO?:

Cancels the current GOTO destination and resumes navigation of

any previously selected route.

SECTION

8

GOTO/MOB

GOTO Options

A

B

A.

The GOTO options page lets you start a
TracBack route, select a destination from the
nearest list, select a route to activate, or cancel
the current GOTO destination.

B.

The nearest waypoints list limits the list to pro-
vide quick access to nearby anchorages, facilities,
etc. which are stored as waypoints.

19000138.10A.QXD  11/11/99  8:47 AM  Page 63

Summary of Contents for GPSMAP 235 Sounder
























































































































Reviews: