GNS 430 Pilot’s Guide and Reference
9-3
SECTION 9
VLOC RECEIVER
4) Press the
ENT
Key to place the frequency in
the standby field of the VLOC Window (Figure
9-6).
Figure 9-6 Frequency in Standby Field
5) Press the
VLOC Flip-flop
Key to activate the
selected frequency.
6) Press the small
right
knob to remove the
flashing cursor.
NOTE: For duplex COM operations, the VLOC
receiver may be auto-tuned from the Nearest
Flight Service Station Page. See Section 8.8 for
more info.
When selecting a VOR or ILS approach, manual
tuning of the VLOC receiver is not required. Once the
approach procedure is ‘Loaded’ or ‘Activated’, the GNS
430 automatically places the proper frequency in the
standby field of the VLOC Window. To use this frequency,
press the
VLOC Flip-flop
Key to activate the frequency.
Additional information on approach procedures is
provided in Section 6.1.
To select an approach and automatically
tune the proper VLOC frequency:
1) Select the destination airport using the
Direct-
to
Key or as the last waypoint in the active
flight plan.
2) Press the
PROC
Key to display the Procedures
Page.
3) Turn the large
right
knob to highlight ‘Select
Approach?’ and press the
ENT
Key (Figure
9-7).
Figure 9-7 Procedures Page
4) A window appears listing the available
procedures. Turn the small
right
knob to
highlight the desired procedure and press the
ENT
Key. (When a direct-to destination is
selected, departures are offered for the nearest
airport.)
5) A second window appears listing available
transitions. Turn the small
right
knob to
highlight the desired transition waypoint and
press the
ENT
Key. (The approach ‘Vectors’
option assumes the pilot will receive vectors to
the final course segment of the approach and
will provide navigation guidance to intercept
this final course.)
Summary of Contents for GNS 430
