GNS 430 Pilot’s Guide and Reference
7-2
SECTION 7
WPT PAGES
To enter a waypoint identifier:
1) Select the desired WPT page and press the
small
right
knob to activate the cursor.
2) Turn the small
right
knob to select the first
character of the waypoint’s identifier.
3) Turn the large
right
knob to select the next
character field.
4) Turn the small
right
knob to select the desired
character.
5) Repeat steps 3 and 4 until the identifier is
selected, then press the
ENT
Key.
6) To remove the flashing cursor, press the small
right
knob.
To enter a waypoint facility name or city
location:
1) Select the Airport Location Page, NDB Page
or VOR Page from the WPT Page Group (as
described on the preceding page).
2) Press the small
right
knob to activate the
cursor.
3) Turn the large
right
knob to select the facility
name or location (city) field.
4) Turn the small
right
knob to select the desired
character (Figure 7-2).
Figure 7-2 Airport Location Page
5) Turn the large
right
knob to select the next
character field.
6) Repeat steps 4 and 5 until the facility name or
location is selected, then press the
ENT
Key
(Figures 7-3 and 7-4).
Figure 7-3 Airport Location Page
Figure 7-4 VOR Page
7) To remove the flashing cursor, press the small
right
knob.
Summary of Contents for GNS 430
