GNS 430 Pilot’s Guide and Reference
7-12
SECTION 7
WPT PAGES
7) Turn the small
right
knob to display a window
of available runways (Figure 7-25). Continue
turning the small
right
knob to select the
desired runway. (‘ALL’ may appear in the
runway field, indicating the arrival procedure
applies to all runways. For airports with
parallel runways, ‘B’ may appear at the end of
the runway designation to indicate the arrival
procedure applies to both runways.)
Figure 7-25 Runway Window
8) Press the
ENT
Key. To remove the flashing
cursor, press the small
right
knob.
Airport Arrival Page Options
The following option is available for the Airport Arrival
Page, by pressing the
MENU
Key:
‘Load into Active FPL?’ allows the pilot to load the
selected arrival into the active flight plan. This is identical
to loading an arrival procedure from the Procedures Page,
as described in Section 6.1.
To load an arrival procedure from the
Airport Arrival Page:
1) Select the desired arrival, transition, and
runway using the steps above.
2) Press the
MENU
Key to display the Airport
Arrival Page Menu.
3) Press the
ENT
Key to select the ‘Load into
Active FPL?’ option (Figure 7-26).
Figure 7-26 Airpoirt Arrival Page Menu
4) The Active Flight Plan Page appears. Press the
FPL
Key to return to the Airport Arrival Page.
Summary of Contents for GNS 430
