GNS 430 Pilot’s Guide and Reference
SECTION 3
NAV PAGES
3-21
6) Press the
ENT
Key to select the desired type
and return to the Position Page.
7) To select between ‘bearing FROM’ or ‘bearing
TO’ to the reference waypoint, turn the small
right
knob to select the desired bearing
reference (Figure 3-44) and press the
ENT
Key.
Figure 3-44 Mode Window
8) Press the small
right
knob momentarily to
remove the cursor from the page.
Restoring Factory Settings
A ‘Restore Defaults?’ option allows all data fields to be
reset to their original factory default settings. This returns
the three user-selectable fields at the top of the page AND
the reference waypoint fields to default settings.
To restore the factory default settings:
1) Press the
MENU
Key to display the Position
Page Menu (Figure 3-45).
Figure 3-45 Position Page Menu
2) Turn the large
right
knob to highlight ‘Restore
Defaults?’ and press the
ENT
Key.
Summary of Contents for GNS 430
