9 - AUX PAGES
167
190-00356-00 Rev B
Setup 1
Airspace Alarms
To set the airspace warning messages or change
the altitude buffer:
1. Select “Arspace Alarms” from the setup 1
page.
2. Turn the
large right
knob to hghlght the
“On”/”Off” field next to the desred arspace
type.
3. Turn the
small right
knob to select “On” or
“Off”, as desred. Press
ENT
to accept the
selecton.
4. To change the alttude buffer, turn the
large
right
knob to hghlght the “Alttude Buffers”
field. Use the
small
and
large
right
knobs
to enter the desred buffer dstance. Press
ENT
when finshed.
NOTE:
When an approach has been loaded into
the active flight plan, airspace alert messages
will be disabled within 30 NM of the destination
airport.
CDI Scale / Alarms
To change the CDI scale:
1. Select “CDI / Alarms” from the Setup 1 page.
2. The flashng cursor hghlghts the “Selected
CDI” field. Turn the
small right
knob to select
the desred CDI scale. The selected scale and
any lower scale settngs wll be used durng
the varous phases of flght.
3. Press
ENT
to accept the selected scale. The
“System CDI” field wll dsplay the CDI scale
currently n use. The “System CDI” settng may
dffer from the “Selected CDI” dependng upon
the current phase of flght.
NOTE:
The CDI scale is always measured in nauti-
cal miles, regardless of the current distance units
of measure selected on the units/mag var page.
Summary of Contents for GNC 420AW
