Garmin G2000, Cockpit Reference Manual

Page: 78 / 194

Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240 190-01264-01 Rev. A
62
Procedures
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
AFCS
FMS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal Oper
ation
Annun/
Alerts
Appendix
Index
a)
If Baro is desired, use the keypad to select the barometric minimum
altitude.
b)
Touch the
Enter
Button to accept the barometric minimum altitude and
return to the Approach Selection Screen.
Or:
a)
If temperature compensated minimum is desired, touch the
Minimums
Button to display the Minimums Source Window.
b)
Touch the
Temp Comp
Button to select temperature compensated
minimums and return to the Minimums Screen.
c)
Use the numeric keypad to select the destination temperature.
d) Touch the Enter Button to accept the destination temperature and
return to the Minimums Screen.
e) Use the keypad to select the minimums altitude.
f)
Touch the
Enter
Button to accept the temperature compensated
minimums and return to the Approach Selection Screen.
10)
Touch the Preview Button, then the Show on Map Button to show the
preview of the approach.
11)
Touch the Load Button to insert the approach into the stored flight plan.
NOTE: When GPS is not approved for the selected final approach course, the
message ‘NOT APPROVED FOR GPS’ is displayed. GPS provides guidance to
the approach, but the HSI must to be switched to a NAV receiver to fly the
final course of the approach.
Loading an approach into the active flight plan using the PFD
Controller:
1)
Press the PROC Key. The Procedures Window is displayed.
2)
Highlight ‘SELECT APPROACH’.
3)
Press the ENT Key or the small PFD Knob. The Select Approach Window is
displayed.
4)
Use the PFD Knob to select an airport and press the ENT Key or the small
PFD
Knob.
5)
Select an approach from the list and press the ENT Key or the small PFD
Knob.