Garmin G2000 Cockpit Reference Manual Download

Page: 110 / 194

Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240

190-01264-01 Rev. A

Additional Features

Flight

Instruments

EIS

Nav/Com/

XPDR/Audio

AFCS

FMS Nav

Flight

Planning

ocedur

Hazar

Avoidance

Additional

Featur

Abnormal

Oper

ation

Annun/

Alerts

Appendix

Index

Sending a Text Message

From the

Home

Screen, touch

Services

SMS Text

Touch the

Options

Button. The available options are displayed.

Touch the

Draft New Message

Button. The Opened SMS Text Message

Draft Screen is displayed. The Draft New Message option is also available
from within the

Drafts

and

Outbox

Tabs.

Touch the ‘To’ Window. A selection screen is displayed. If the text message
is to be sent to SMS compatible telephone, touch the

Phone

Button. If the

message is to be sent to an email address, touch

Email

Enter the telephone number or email address. The number or address may
be obtained from the Contacts by touching the

Find

Button.

Touch the

Enter

Button. The number or address is now displayed.

Touch the ‘Message’

Window. The alphanumeric buttons are displayed.

Text Message Boxes

Received text messages reside in the Inbox as ‘Read’ or ‘Unread’ messages. The

Outbox contains ‘Sent” and ‘Unsent’ text messages. Saved messages that are meant to
be sent later are stored as Drafts.

View Inbox messages:

From the

Home

Screen, touch

Services

SMS Text

Touch the

Inbox

Tab. A list of received messages is displayed. The

Inbox

Tab is selected by default when accessing the SMS Text Messaging Screen.

View Draft messages:

From the

Home

Screen, touch

Services

SMS Text

Touch the

Draft

Tab. A list of draft messages is displayed, provided

messages have been previously saved.

Touch a message to access the

Send

Delete

Buttons.

View Outbox messages:

From the

Home

Screen, touch

Services

SMS Text

Touch the

Inbox

Tab. A list of sent or unsent messages is displayed.

Touch a message to access the

Send Again

Delete,

and

Save Contact

Buttons.

Summary of Contents for G2000



































































































































































































Search results

Summary of Contents for G2000

Reviews:

Related manuals for G2000

Brands by name

Popular brands

Garmin G2000, Cockpit Reference Manual

Search results

Summary of Contents for G2000

Reviews:

Related manuals for G2000

Brands by name

Popular brands