Garmin G2000 Cockpit Reference Manual Download

Page: 113 / 194

Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240

190-01264-01 Rev. A

Additional Features

Flight

Instruments

EIS

Nav/Com/

XPDR/Audio

AFCS

FMS Nav

Flight

Planning

ocedur

Hazar

Avoidance

Additional

Featur

Abnormal

Oper

ation

Annun/

Alerts

Appendix

Index

Touch the

Message

Button.

The keypad is displayed. Enter the message name using the keypad. The
large and small Right Knob can also be used to enter the characters.

Touch the

Enter

Button. The message name is displayed on the

Message

Button.

Touch the

Frequency

Button.

Touch

Event

One Time

Periodic

. The selection is displayed on the

Frequency

Button.

Touch the

Time

Button.

The numeric keypad is displayed. Enter the time value using the keypad.
If

One Time

Periodic

were selected in step 7, the time is entered in a

HH:MM:SS format. If

Event

was selected in step 7, time is entered in a

clock format (HH:MM

LcL

) as local time.

10)

Touch the

Enter

Button. The time is displayed on the

Time

Button.

11)

Event

was selected in step 7, touch the

Date

Button. The

Date

Button

is subdued and disabled when

One Time

Periodic

were selected in

step 7.

12)

Touch the desired year, then the month followed by the day.

Edit a scheduled message:

From the

Home

Screen, touch

Utilities

Scheduled Messages

Touch the name of the message to be edited. The Message Options
Window is displayed.

Touch the

Edit Message

Button.

Select the desired message parameter to be edited and perform the needed
steps as discussed previously for entering a scheduled message.

Deleting a scheduled message:

From the

Home

Screen, touch

Utilities

Scheduled Messages

Touch the name of the message to be deleted. The Message Options
Window is displayed.

Touch the

Delete Message

Button. Touch the

Delete All Messages

Button to delete all saved messages.

Summary of Contents for G2000



































































































































































































Search results

Summary of Contents for G2000

Reviews:

Related manuals for G2000

Brands by name

Popular brands

Garmin G2000, Cockpit Reference Manual

Search results

Summary of Contents for G2000

Reviews:

Related manuals for G2000

Brands by name

Popular brands