manualshive.com logo in svg

Garmin G2000, Cockpit Reference Manual

The Garmin G2000, a cutting-edge cockpit system, offers advanced avionics capabilities. Get comprehensive guidance on its functions and features with the detailed Cockpit Reference Manual. Download this invaluable manual for free from manualshive.com, allowing you to maximize your G2000 experience.

Share
Download
background image

Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240

190-01264-01  Rev. A

Appendix

166

Flight

Instruments

EIS

Nav/Com/

XPDR/Audio

AFCS

FMS Nav

Flight

Planning

Pr

ocedur

es

Hazar

d

Avoidance

Additional

Featur

es

Abnormal

Oper

ation

Annun/

Alerts

Appendix

Index

memory of each GTC.  After power-up, the system compares all copies of each 
applicable database.  If similar databases do not match, the most recent valid database 
is automatically copied to each card in the system that does not already contain that 
database.

The following databases are checked and synchronized: Navigation, Basemap, 

SafeTaxi, Terrain, Obstacle, FliteCharts, ChartView, and Airport Directory.

 

NOTE: 

The terrain database may take as long as 100 minutes to synchronize 

using this method.  Therefore the user may want to transfer the data using a PC, 
or connect the system to a ground power source while performing the database 
synchronization.

The synchronization progress may be monitored on the Database Status Screen on the 

Touchscreen Controller.  This screen shows the synchronization status of each applicable 
database as follows:

• 

‘Sync in Progress’ with percent complete and time remaining

• 

‘Sync Complete’

• 

‘Sync Error’

While database synchronization is occurring, ‘Sync in Progress’ is displayed along 

with percent complete and time remaining.  When the synchronization is complete 
for the selected GDU or GTC Database Status Screen, the status is listed as ‘Sync 
Complete’.  The synchronization status is only present when a sync is occurring or has 
occurred on the current power-up.

An indication of ‘Sync Complete’ still requires a power cycle before the synchronized 

databases will be used by the system.

To view database status:

1) 

From the 

Home

 Screen, touch 

Utilities > Setup > Avionics Status

.

 

Or

 From the 

PFD

 

Home 

screen

, 

touch

 Utilities > Avionics Status.

2) 

If necessary, touch the 

Database

 Tab.  The Touchscreen Controller shows a list 

of displays on which databases reside.

3) 

Touch a button from the list to view database information associated with that 
display (

MFD1, PFD1, and GTC1

).  

4) 

Scroll through the database information to view database status.

Summary of Contents for G2000



































































































































































































Reviews:

No comments

Related manuals for G2000

WatchDog LT Quick Start Manual preview
LT
Brand: WatchDog Pages: 3
Raven CRX Installation Manual preview
CRX
Brand: Raven Pages: 35
Japan Radio Co. jlr-21 Instruction Manual preview
jlr-21
Brand: Japan Radio Co. Pages: 148
Interphase Chart Master 169CSI User Manual preview
Chart Master 169CSI
Brand: Interphase Pages: 89
RPC Electronics YagTracker User Manual preview
YagTracker
Brand: RPC Electronics Pages: 33
Coban GPS305 User Manual preview
GPS305
Brand: Coban Pages: 15
NAVTELECOM SIGNAL S-2654 Manual preview
SIGNAL S-2654
Brand: NAVTELECOM Pages: 36
EverMore GM-307 Setup Manual preview
GM-307
Brand: EverMore Pages: 30
Entec Solar E-1000 User Manual preview
E-1000
Brand: Entec Solar Pages: 47
Garmin GPS 150 Installation Manual preview
GPS 150
Brand: Garmin Pages: 30
UniGuard UM340 User Manual preview
UM340
Brand: UniGuard Pages: 5
Morbella iNav 610XT User Manual preview
iNav 610XT
Brand: Morbella Pages: 61
Tait TMAA05-01 Installation Instructions preview
TMAA05-01
Brand: Tait Pages: 2
Elari SmarTrack User Manual preview
SmarTrack
Brand: Elari Pages: 136
astra telematics AT110V5 User Manual preview
AT110V5
Brand: astra telematics Pages: 11
astra telematics AT240 User Manual preview
AT240
Brand: astra telematics Pages: 26
astra telematics AT210 User Manual preview
AT210
Brand: astra telematics Pages: 29
REWIRE SECURITY DB3 User Manual preview
DB3
Brand: REWIRE SECURITY Pages: 122

Brands by name

Popular brands

Load more brands