Garmin ENDURO, Manual

Page: 12 / 54

8
The distance to the back of the green
The distance to the middle of the green or selected pin position
The distance to the front of the green
The current hole number
The par for the current hole
Moving the Flag
You can take a closer look at the green and move the pin
location.
1
From the hole information screen, press .
2
Select Move Flag .
3
Press UP or DOWN to move the pin position.
4
Press .
The distances on the hole information screen are updated to
show the new pin location. The pin location is saved for only
the current round.
Viewing Measured Shots
Before the device can automatically detect and measure shots,
you must enable scoring.
Your device features automatic shot detection and recording.
Each time you take a shot along the fairway, the device records
your shot distance so you can view it later.
TIP: Automatic shot detection works best when you wear the
device on your leading wrist and make good contact with the
ball. Putts are not detected.
1
While playing golf, press .
2
Select Measure Shot .
Your last shot distance appears.
NOTE: The distance automatically resets when you hit the
ball again, putt on the green, or move to the next hole.
3
Press DOWN .
4
Select Previous Shots to view all recorded shot distances.
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and 5
holes. Custom targets also appear in this list.
1
From the hole information screen, press .
2
Select
Layups
.
Each layup and the distance until you reach each layup
appear on the screen.
NOTE:
Distances are removed from the list as you pass
them.
Saving Custom Targets
While playing a round, you can save up to five custom targets
for each hole. Saving a target is useful for recording objects or
obstacles that are not shown on the map. You can view the
distances to these targets from the layup and dogleg screen
( Viewing Layup and Dogleg Distances , page 8 ).
1
Stand near the target you want to save.
NOTE:
You cannot save a target that is far from the currently
selected hole.
2
From the hole information screen, press .
3
Select Custom Targets .
4
Select a target type.
Viewing Club Statistics
Before you can view your club statistics, such as distance and
accuracy information, you must either pair the device with
Approach
®
CT10 golf club sensors (
Club Sensors
, page 40 ), or
enable the Club Prompt setting.
1
While playing golf, press .
2
Select
Club Stats
.
3
Select a club.
Keeping Score
1
From the hole information screen, press .
2
Select Scorecard .
The scorecard appears when you are on the green.
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to set the score.
Your total score is updated.
Updating a Score
1
From the hole information screen, press .
2
Select Scorecard .
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to change the score for that hole.
Your total score is updated.
Setting the Scoring Method
You can change the method the device uses to keep score.
1
From the hole information screen, hold MENU .
2
Select the activity settings.
3
Select Scoring Method .
4
Select a scoring method.
About Stableford Scoring
When you select the Stableford scoring method (
Setting the
Scoring Method
, page 8 ), points are awarded based on the
number of strokes taken relative to par. At the end of a round,
the highest score wins. The device awards points as specified
by the United States Golf Association.
The scorecard for a Stableford scored game shows points
instead of strokes.
Points Strokes Taken Relative to Par
0 2 or more over
1 1 over
2 Par
3 1 under
4 2 under
5 3 under
Setting Your Handicap
1
From the hole information screen, hold MENU .
2
Select the activity settings.
3
Select Handicap Scoring .
4
Select a handicap scoring option:
• To enter the number of strokes to be subtracted from your
total score, select Local Handicap .
• To enter the player's handicap index and the course slope
rating used to calculate your course handicap, select
Index/Slope .
5
Set your handicap.
8 Activities and Apps
Current hole number
Distance to the back of the green
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Map of the green
Driver distance from the tee box
Big Numbers Mode
You can change the size of the numbers on the hole information
screen.
Hold
MENU , select the activity settings, and select Big
Numbers .
The distance to the back of the green
The distance to the middle of the green or selected pin position
The distance to the front of the green
The current hole number
The par for the current hole
Measuring Distance with Button Targeting
From the hole information screen, you can use the button
targeting feature to measure the distance to a point on the map.
1
Press UP or DOWN to measure the distance to the target.
2
If necessary, select or to zoom in or out.
Changing Holes
You can change holes manually from the hole view screen.
1
While playing golf, press .
2
Select
Change Hole
.
3
Select a hole.
Moving the Flag
You can take a closer look at the green and move the pin
location.
1
From the hole information screen, press .
2
Select Move Flag .
3
Press UP or DOWN to move the pin position.
4
Press .
The distances on the hole information screen are updated to
show the new pin location. The pin location is saved for only
the current round.
Viewing Measured Shots
Before the device can automatically detect and measure shots,
you must enable scoring.
Your device features automatic shot detection and recording.
Each time you take a shot along the fairway, the device records
your shot distance so you can view it later.
TIP: Automatic shot detection works best when you wear the
device on your leading wrist and make good contact with the
ball. Putts are not detected.
1
While playing golf, press .
2
Select Measure Shot .
Your last shot distance appears.
NOTE: The distance automatically resets when you hit the
ball again, putt on the green, or move to the next hole.
3
Press DOWN to view all recorded shot distances.
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and 5
holes. Custom targets also appear in this list.
1
From the hole information screen, press .
2
Select Layups .
Each layup and the distance until you reach each layup
appear on the screen.
NOTE: Distances are removed from the list as you pass
them.
Saving Custom Targets
While playing a round, you can save up to five custom targets
for each hole. Saving a target is useful for recording objects or
obstacles that are not shown on the map. You can view the
distances to these targets from the layup and dogleg screen
(
Viewing Layup and Dogleg Distances
, page 6 ).
1
Stand near the target you want to save.
NOTE: You cannot save a target that is far from the currently
selected hole.
2
From the hole information screen, press .
3
Select Custom Targets .
4
Select a target type.
Keeping Score
1
From the hole information screen, press .
2
Select Scorecard .
The scorecard appears when you are on the green.
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to set the score.
Your total score is updated.
Updating a Score
1
From the hole information screen, press .
2
Select Scorecard .
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to change the score for that hole.
Your total score is updated.
Setting the Scoring Method
You can change the method the device uses to keep score.
1
From the hole information screen, hold
MENU
.
2
Select the activity settings.
3
Select
Scoring Method
.
4
Select a scoring method.
6 Activities and Apps
A green hátuljának távolsága.
Current hole number
Distance to the back of the green
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Map of the green
Driver distance from the tee box
Big Numbers Mode
You can change the size of the numbers on the hole information
screen.
Hold
MENU , select the activity settings, and select Big
Numbers .
The distance to the back of the green
The distance to the middle of the green or selected pin position
The distance to the front of the green
The current hole number
The par for the current hole
Measuring Distance with Button Targeting
From the hole information screen, you can use the button
targeting feature to measure the distance to a point on the map.
1
Press UP or DOWN to measure the distance to the target.
2
If necessary, select or to zoom in or out.
Changing Holes
You can change holes manually from the hole view screen.
1
While playing golf, press .
2
Select Change Hole .
3
Select a hole.
Moving the Flag
You can take a closer look at the green and move the pin
location.
1
From the hole information screen, press .
2
Select Move Flag .
3
Press UP or DOWN to move the pin position.
4
Press .
The distances on the hole information screen are updated to
show the new pin location. The pin location is saved for only
the current round.
Viewing Measured Shots
Before the device can automatically detect and measure shots,
you must enable scoring.
Your device features automatic shot detection and recording.
Each time you take a shot along the fairway, the device records
your shot distance so you can view it later.
TIP: Automatic shot detection works best when you wear the
device on your leading wrist and make good contact with the
ball. Putts are not detected.
1
While playing golf, press .
2
Select Measure Shot .
Your last shot distance appears.
NOTE: The distance automatically resets when you hit the
ball again, putt on the green, or move to the next hole.
3
Press
DOWN
to view all recorded shot distances.
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and 5
holes. Custom targets also appear in this list.
1
From the hole information screen, press .
2
Select Layups .
Each layup and the distance until you reach each layup
appear on the screen.
NOTE: Distances are removed from the list as you pass
them.
Saving Custom Targets
While playing a round, you can save up to five custom targets
for each hole. Saving a target is useful for recording objects or
obstacles that are not shown on the map. You can view the
distances to these targets from the layup and dogleg screen
( Viewing Layup and Dogleg Distances , page 6 ).
1
Stand near the target you want to save.
NOTE: You cannot save a target that is far from the currently
selected hole.
2
From the hole information screen, press .
3
Select Custom Targets .
4
Select a target type.
Keeping Score
1
From the hole information screen, press .
2
Select Scorecard .
The scorecard appears when you are on the green.
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to set the score.
Your total score is updated.
Updating a Score
1
From the hole information screen, press .
2
Select Scorecard .
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to change the score for that hole.
Your total score is updated.
Setting the Scoring Method
You can change the method the device uses to keep score.
1
From the hole information screen, hold MENU .
2
Select the activity settings.
3
Select Scoring Method .
4
Select a scoring method.
6 Activities and Apps
A green közepének távolsága vagy kiválasztott zászló helye.
Current hole number
Distance to the back of the green
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Map of the green
Driver distance from the tee box
Big Numbers Mode
You can change the size of the numbers on the hole information
screen.
Hold
MENU , select the activity settings, and select Big
Numbers .
The distance to the back of the green
The distance to the middle of the green or selected pin position
The distance to the front of the green
The current hole number
The par for the current hole
Measuring Distance with Button Targeting
From the hole information screen, you can use the button
targeting feature to measure the distance to a point on the map.
1
Press UP or DOWN to measure the distance to the target.
2
If necessary, select or to zoom in or out.
Changing Holes
You can change holes manually from the hole view screen.
1
While playing golf, press .
2
Select Change Hole .
3
Select a hole.
Moving the Flag
You can take a closer look at the green and move the pin
location.
1
From the hole information screen, press .
2
Select Move Flag .
3
Press UP or DOWN to move the pin position.
4
Press .
The distances on the hole information screen are updated to
show the new pin location. The pin location is saved for only
the current round.
Viewing Measured Shots
Before the device can automatically detect and measure shots,
you must enable scoring.
Your device features automatic shot detection and recording.
Each time you take a shot along the fairway, the device records
your shot distance so you can view it later.
TIP: Automatic shot detection works best when you wear the
device on your leading wrist and make good contact with the
ball. Putts are not detected.
1
While playing golf, press .
2
Select Measure Shot .
Your last shot distance appears.
NOTE: The distance automatically resets when you hit the
ball again, putt on the green, or move to the next hole.
3
Press
DOWN
to view all recorded shot distances.
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and 5
holes. Custom targets also appear in this list.
1
From the hole information screen, press .
2
Select Layups .
Each layup and the distance until you reach each layup
appear on the screen.
NOTE: Distances are removed from the list as you pass
them.
Saving Custom Targets
While playing a round, you can save up to five custom targets
for each hole. Saving a target is useful for recording objects or
obstacles that are not shown on the map. You can view the
distances to these targets from the layup and dogleg screen
( Viewing Layup and Dogleg Distances , page 6 ).
1
Stand near the target you want to save.
NOTE: You cannot save a target that is far from the currently
selected hole.
2
From the hole information screen, press .
3
Select Custom Targets .
4
Select a target type.
Keeping Score
1
From the hole information screen, press .
2
Select Scorecard .
The scorecard appears when you are on the green.
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to set the score.
Your total score is updated.
Updating a Score
1
From the hole information screen, press .
2
Select Scorecard .
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to change the score for that hole.
Your total score is updated.
Setting the Scoring Method
You can change the method the device uses to keep score.
1
From the hole information screen, hold MENU .
2
Select the activity settings.
3
Select Scoring Method .
4
Select a scoring method.
6 Activities and Apps
A green elejének távolsága.
Current hole number
Distance to the back of the green
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Map of the green
Driver distance from the tee box
Big Numbers Mode
You can change the size of the numbers on the hole information
screen.
Hold
MENU , select the activity settings, and select Big
Numbers .
The distance to the back of the green
The distance to the middle of the green or selected pin position
The distance to the front of the green
The current hole number
The par for the current hole
Measuring Distance with Button Targeting
From the hole information screen, you can use the button
targeting feature to measure the distance to a point on the map.
1
Press UP or DOWN to measure the distance to the target.
2
If necessary, select or to zoom in or out.
Changing Holes
You can change holes manually from the hole view screen.
1
While playing golf, press .
2
Select Change Hole .
3
Select a hole.
Moving the Flag
You can take a closer look at the green and move the pin
location.
1
From the hole information screen, press .
2
Select Move Flag .
3
Press UP or DOWN to move the pin position.
4
Press .
The distances on the hole information screen are updated to
show the new pin location. The pin location is saved for only
the current round.
Viewing Measured Shots
Before the device can automatically detect and measure shots,
you must enable scoring.
Your device features automatic shot detection and recording.
Each time you take a shot along the fairway, the device records
your shot distance so you can view it later.
TIP: Automatic shot detection works best when you wear the
device on your leading wrist and make good contact with the
ball. Putts are not detected.
1
While playing golf, press .
2
Select Measure Shot .
Your last shot distance appears.
NOTE: The distance automatically resets when you hit the
ball again, putt on the green, or move to the next hole.
3
Press
DOWN
to view all recorded shot distances.
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and 5
holes. Custom targets also appear in this list.
1
From the hole information screen, press .
2
Select Layups .
Each layup and the distance until you reach each layup
appear on the screen.
NOTE: Distances are removed from the list as you pass
them.
Saving Custom Targets
While playing a round, you can save up to five custom targets
for each hole. Saving a target is useful for recording objects or
obstacles that are not shown on the map. You can view the
distances to these targets from the layup and dogleg screen
( Viewing Layup and Dogleg Distances , page 6 ).
1
Stand near the target you want to save.
NOTE: You cannot save a target that is far from the currently
selected hole.
2
From the hole information screen, press .
3
Select Custom Targets .
4
Select a target type.
Keeping Score
1
From the hole information screen, press .
2
Select Scorecard .
The scorecard appears when you are on the green.
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to set the score.
Your total score is updated.
Updating a Score
1
From the hole information screen, press .
2
Select Scorecard .
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to change the score for that hole.
Your total score is updated.
Setting the Scoring Method
You can change the method the device uses to keep score.
1
From the hole information screen, hold MENU .
2
Select the activity settings.
3
Select Scoring Method .
4
Select a scoring method.
6 Activities and Apps
Aktuális lyuk száma.
Current hole number
Distance to the back of the green
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Map of the green
Driver distance from the tee box
Big Numbers Mode
You can change the size of the numbers on the hole information
screen.
Hold
MENU , select the activity settings, and select Big
Numbers .
The distance to the back of the green
The distance to the middle of the green or selected pin position
The distance to the front of the green
The current hole number
The par for the current hole
Measuring Distance with Button Targeting
From the hole information screen, you can use the button
targeting feature to measure the distance to a point on the map.
1
Press UP or DOWN to measure the distance to the target.
2
If necessary, select or to zoom in or out.
Changing Holes
You can change holes manually from the hole view screen.
1
While playing golf, press .
2
Select Change Hole .
3
Select a hole.
Moving the Flag
You can take a closer look at the green and move the pin
location.
1
From the hole information screen, press .
2
Select Move Flag .
3
Press UP or DOWN to move the pin position.
4
Press .
The distances on the hole information screen are updated to
show the new pin location. The pin location is saved for only
the current round.
Viewing Measured Shots
Before the device can automatically detect and measure shots,
you must enable scoring.
Your device features automatic shot detection and recording.
Each time you take a shot along the fairway, the device records
your shot distance so you can view it later.
TIP: Automatic shot detection works best when you wear the
device on your leading wrist and make good contact with the
ball. Putts are not detected.
1
While playing golf, press .
2
Select Measure Shot .
Your last shot distance appears.
NOTE: The distance automatically resets when you hit the
ball again, putt on the green, or move to the next hole.
3
Press
DOWN
to view all recorded shot distances.
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and 5
holes. Custom targets also appear in this list.
1
From the hole information screen, press .
2
Select Layups .
Each layup and the distance until you reach each layup
appear on the screen.
NOTE: Distances are removed from the list as you pass
them.
Saving Custom Targets
While playing a round, you can save up to five custom targets
for each hole. Saving a target is useful for recording objects or
obstacles that are not shown on the map. You can view the
distances to these targets from the layup and dogleg screen
( Viewing Layup and Dogleg Distances , page 6 ).
1
Stand near the target you want to save.
NOTE: You cannot save a target that is far from the currently
selected hole.
2
From the hole information screen, press .
3
Select Custom Targets .
4
Select a target type.
Keeping Score
1
From the hole information screen, press .
2
Select Scorecard .
The scorecard appears when you are on the green.
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to set the score.
Your total score is updated.
Updating a Score
1
From the hole information screen, press .
2
Select Scorecard .
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to change the score for that hole.
Your total score is updated.
Setting the Scoring Method
You can change the method the device uses to keep score.
1
From the hole information screen, hold MENU .
2
Select the activity settings.
3
Select Scoring Method .
4
Select a scoring method.
6 Activities and Apps
A lyuk „par” száma.
Zászló áthelyezése
Egy közelebbi pillantást vethetünk a greenre, illetve áthelyezhetjük a zászlót.
1. A lyuk adatképernyőjén nyomjuk meg a
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Getting Started
When using your watch the first time, you should complete these
tasks to set it up and get to know the basic features.
1
Press LIGHT to turn on the watch (
Buttons
, page 1 ).
2
Follow the on-screen instructions to complete the initial
setup.
During the initial setup, you can pair your smartphone with
your watch to receive notifications, sync your activities, and
more ( Pairing Your Smartphone , page 2 ).
3
Charge the device (
Charging the Device
, page 2 ).
4
Start an activity (
Starting an Activity
, page 2 ).
Buttons
LIGHT
• Press to turn the backlight on and off.
• Press to turn the device on.
• Hold to view the controls menu.
UP·MENU
• Press to scroll through the widget loop and menus.
• Hold to view the menu.
DOWN
• Press to scroll through the widget loop and menus.
• Press to view the activity list and start or stop an activity.
• Press to choose an option in a menu.
BACK·LAP
• Press to return to the previous screen.
• Press to record a lap, rest, or transition during a multisport
activity.
• Hold to view the watch face from any screen.
Using the Watch
• Hold LIGHT to view the controls menu.
The controls menu provides quick access to frequently used
functions, such as turning on do not disturb mode, saving a
location, and turning the watch off.
• From the watch face, press UP or DOWN to scroll through
the widget loop.
Your watch comes preloaded with widgets that provide at-a-
glance information. More widgets are available when you pair
your watch with a smartphone.
• From the watch face, press to start an activity or open an
app ( Activities and Apps , page 2 ).
• Hold MENU to customize the watch face, adjust settings, and
pair wireless sensors.
Viewing the Controls Menu
The controls menu contains options, such as turning on do not
disturb mode, locking the keys, and turning the device off. You
can also open the Garmin Pay
™
wallet.
NOTE:
You can add, reorder, and remove the options in the
controls menu ( Customizing the Controls Menu , page 36 ).
1
From any screen, hold LIGHT .
2
Press UP or DOWN to scroll through the options.
Enabling Airplane Mode
You can enable airplane mode to disable all wireless
communications.
NOTE: You can add options to the controls menu (
Customizing
the Controls Menu
, page 36 ).
1
Hold LIGHT .
2
Select .
Viewing Widgets
Your device comes preloaded with several widgets, and more
are available when you pair your device with a smartphone.
• Press
UP
or
DOWN
.
The device scrolls through the widget loop and displays
summary data for each widget.
• Press to view widget details.
TIP: You can press DOWN to view additional screens for a
widget, or press to view additional options and functions
for a widget.
• From any screen, hold BACK to return to the watch face.
• If you are recording an activity, press BACK to return to the
activity data pages.
Customizing the Watch
• From the watch face, hold MENU to change the watch face.
• From the widget screens, hold MENU to customize the
widget options.
• From the controls menu, hold MENU to add, remove, and
reorder the controls.
• From any screen, hold MENU to change additional settings.
Introduction 1
gombot, majd válasszuk a
Zászlót áthelyez pontot.
2.
Az
UP
vagy
DOWN
gombokkal mozgathatjuk a zászlót.
3. Nyomjuk meg a
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Getting Started
When using your watch the first time, you should complete these
tasks to set it up and get to know the basic features.
1
Press
LIGHT
to turn on the watch ( Buttons , page 1 ).
2
Follow the on-screen instructions to complete the initial
setup.
During the initial setup, you can pair your smartphone with
your watch to receive notifications, sync your activities, and
more ( Pairing Your Smartphone , page 2 ).
3
Charge the device (
Charging the Device
, page 2 ).
4
Start an activity (
Starting an Activity
, page 2 ).
Buttons
LIGHT
• Press to turn the backlight on and off.
• Press to turn the device on.
• Hold to view the controls menu.
UP·MENU
• Press to scroll through the widget loop and menus.
• Hold to view the menu.
DOWN
• Press to scroll through the widget loop and menus.
• Press to view the activity list and start or stop an activity.
• Press to choose an option in a menu.
BACK·LAP
• Press to return to the previous screen.
• Press to record a lap, rest, or transition during a multisport
activity.
• Hold to view the watch face from any screen.
Using the Watch
• Hold LIGHT to view the controls menu.
The controls menu provides quick access to frequently used
functions, such as turning on do not disturb mode, saving a
location, and turning the watch off.
• From the watch face, press UP or DOWN to scroll through
the widget loop.
Your watch comes preloaded with widgets that provide at-a-
glance information. More widgets are available when you pair
your watch with a smartphone.
• From the watch face, press to start an activity or open an
app ( Activities and Apps , page 2 ).
• Hold MENU to customize the watch face, adjust settings, and
pair wireless sensors.
Viewing the Controls Menu
The controls menu contains options, such as turning on do not
disturb mode, locking the keys, and turning the device off. You
can also open the Garmin Pay
™
wallet.
NOTE: You can add, reorder, and remove the options in the
controls menu ( Customizing the Controls Menu , page 36 ).
1
From any screen, hold LIGHT .
2
Press UP or DOWN to scroll through the options.
Enabling Airplane Mode
You can enable airplane mode to disable all wireless
communications.
NOTE: You can add options to the controls menu (
Customizing
the Controls Menu
, page 36 ).
1
Hold LIGHT .
2
Select .
Viewing Widgets
Your device comes preloaded with several widgets, and more
are available when you pair your device with a smartphone.
• Press
UP
or
DOWN
.
The device scrolls through the widget loop and displays
summary data for each widget.
• Press to view widget details.
TIP: You can press DOWN to view additional screens for a
widget, or press to view additional options and functions
for a widget.
• From any screen, hold BACK to return to the watch face.
• If you are recording an activity, press BACK to return to the
activity data pages.
Customizing the Watch
• From the watch face, hold MENU to change the watch face.
• From the widget screens, hold MENU to customize the
widget options.
• From the controls menu, hold MENU to add, remove, and
reorder the controls.
• From any screen, hold MENU to change additional settings.
Introduction 1
gombot.
A lyuk adatképernyőjén található távolság adatok az új zászló pozíciónak
megfelelően módosulnak. A zászló helye csak az aktuális körhöz kerül
mentésre.
Ütéstávolság mérés
Mielőtt a készülék automatikusa érzékelni és mérni tudná az ütéseket, be
kell kapcsolnunk a pontszámok követését. A készülék automatikus ütésér-
zékelő és rögzítő funkcióval rendelkezik. Ahányszor a golfpályán ütést haj-
tunk végre, a készülék rögzíti az ütéstávolságot, amelyet mi készőbb meg-
tekinthetünk.
TIPP! Az automatikus ütésérzékelés, ha a készüléket domináns csuklónkon
viseljük és a labdát megfelelően ütjük meg. A gurításokat a készülék nem ér-
zékeli.
1. Golfozás közben nyomjuk meg a
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Getting Started
When using your watch the first time, you should complete these
tasks to set it up and get to know the basic features.
1
Press LIGHT to turn on the watch ( Buttons , page 1 ).
2
Follow the on-screen instructions to complete the initial
setup.
During the initial setup, you can pair your smartphone with
your watch to receive notifications, sync your activities, and
more (
Pairing Your Smartphone
, page 2 ).
3
Charge the device ( Charging the Device , page 2 ).
4
Start an activity (
Starting an Activity
, page 2 ).
Buttons
LIGHT
• Press to turn the backlight on and off.
• Press to turn the device on.
• Hold to view the controls menu.
UP·MENU
• Press to scroll through the widget loop and menus.
• Hold to view the menu.
DOWN
• Press to scroll through the widget loop and menus.
• Press to view the activity list and start or stop an activity.
• Press to choose an option in a menu.
BACK·LAP
• Press to return to the previous screen.
• Press to record a lap, rest, or transition during a multisport
activity.
• Hold to view the watch face from any screen.
Using the Watch
• Hold LIGHT to view the controls menu.
The controls menu provides quick access to frequently used
functions, such as turning on do not disturb mode, saving a
location, and turning the watch off.
• From the watch face, press UP or DOWN to scroll through
the widget loop.
Your watch comes preloaded with widgets that provide at-a-
glance information. More widgets are available when you pair
your watch with a smartphone.
• From the watch face, press to start an activity or open an
app ( Activities and Apps , page 2 ).
• Hold MENU to customize the watch face, adjust settings, and
pair wireless sensors.
Viewing the Controls Menu
The controls menu contains options, such as turning on do not
disturb mode, locking the keys, and turning the device off. You
can also open the Garmin Pay
™
wallet.
NOTE: You can add, reorder, and remove the options in the
controls menu ( Customizing the Controls Menu , page 36 ).
1
From any screen, hold LIGHT .
2
Press UP or DOWN to scroll through the options.
Enabling Airplane Mode
You can enable airplane mode to disable all wireless
communications.
NOTE:
You can add options to the controls menu ( Customizing
the Controls Menu , page 36 ).
1
Hold LIGHT .
2
Select .
Viewing Widgets
Your device comes preloaded with several widgets, and more
are available when you pair your device with a smartphone.
• Press
UP or DOWN .
The device scrolls through the widget loop and displays
summary data for each widget.
• Press to view widget details.
TIP: You can press DOWN to view additional screens for a
widget, or press to view additional options and functions
for a widget.
• From any screen, hold BACK to return to the watch face.
• If you are recording an activity, press BACK to return to the
activity data pages.
Customizing the Watch
• From the watch face, hold MENU to change the watch face.
• From the widget screens, hold MENU to customize the
widget options.
• From the controls menu, hold MENU to add, remove, and
reorder the controls.
• From any screen, hold MENU to change additional settings.
Introduction 1
gombot, majd válasszuk az Ütésmé-
rés pontot.
Megjelenik az utolsó ütéstávolságunk.
MEGJEGYZÉS! A távolság automatikusan lenullázódik, amikor újat
ütünk, gurítunk a greenen, vagy tovább lépünk a következő lyukhoz.
2. A DOWN gomb lenyomásával megtekinthetjük az összes rögzített ütéstá-
volságot.
Layup és dogleg távolságok
A par 4-es és par 5-ös lyukak esetében megtekinthetjük a layup és dogleg tá-
volságokat. Az egyéni célpontok is ebben a listában jelennek meg.
1. A lyuk adatképernyőn yomjuk meg a
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Getting Started
When using your watch the first time, you should complete these
tasks to set it up and get to know the basic features.
1
Press
LIGHT
to turn on the watch ( Buttons , page 1 ).
2
Follow the on-screen instructions to complete the initial
setup.
During the initial setup, you can pair your smartphone with
your watch to receive notifications, sync your activities, and
more ( Pairing Your Smartphone , page 2 ).
3
Charge the device (
Charging the Device
, page 2 ).
4
Start an activity (
Starting an Activity
, page 2 ).
Buttons
LIGHT
• Press to turn the backlight on and off.
• Press to turn the device on.
• Hold to view the controls menu.
UP·MENU
• Press to scroll through the widget loop and menus.
• Hold to view the menu.
DOWN
• Press to scroll through the widget loop and menus.
• Press to view the activity list and start or stop an activity.
• Press to choose an option in a menu.
BACK·LAP
• Press to return to the previous screen.
• Press to record a lap, rest, or transition during a multisport
activity.
• Hold to view the watch face from any screen.
Using the Watch
• Hold LIGHT to view the controls menu.
The controls menu provides quick access to frequently used
functions, such as turning on do not disturb mode, saving a
location, and turning the watch off.
• From the watch face, press UP or DOWN to scroll through
the widget loop.
Your watch comes preloaded with widgets that provide at-a-
glance information. More widgets are available when you pair
your watch with a smartphone.
• From the watch face, press to start an activity or open an
app ( Activities and Apps , page 2 ).
• Hold MENU to customize the watch face, adjust settings, and
pair wireless sensors.
Viewing the Controls Menu
The controls menu contains options, such as turning on do not
disturb mode, locking the keys, and turning the device off. You
can also open the Garmin Pay
™
wallet.
NOTE: You can add, reorder, and remove the options in the
controls menu ( Customizing the Controls Menu , page 36 ).
1
From any screen, hold LIGHT .
2
Press UP or DOWN to scroll through the options.
Enabling Airplane Mode
You can enable airplane mode to disable all wireless
communications.
NOTE: You can add options to the controls menu (
Customizing
the Controls Menu
, page 36 ).
1
Hold LIGHT .
2
Select .
Viewing Widgets
Your device comes preloaded with several widgets, and more
are available when you pair your device with a smartphone.
• Press
UP
or
DOWN
.
The device scrolls through the widget loop and displays
summary data for each widget.
• Press to view widget details.
TIP: You can press DOWN to view additional screens for a
widget, or press to view additional options and functions
for a widget.
• From any screen, hold BACK to return to the watch face.
• If you are recording an activity, press BACK to return to the
activity data pages.
Customizing the Watch
• From the watch face, hold MENU to change the watch face.
• From the widget screens, hold MENU to customize the
widget options.
• From the controls menu, hold MENU to add, remove, and
reorder the controls.
• From any screen, hold MENU to change additional settings.
Introduction 1
gombot.
2.
Válasszuk a
Layups
pontot.
Az egyes layup eléréséig láthatjuk a layupot és az ahhoz tartozó távolsá-
got.
NE FELEDJÜK!
Ahogy megtesszük ezeket, a távolságok törlődnek a lis-
tából.
Egyéni célpont mentése
Golfozás közben minden lyuknál akár öt egyéni célt állíthatunk be. A célpont
mentése a térképen nem látható tárgyak és akadályok feljegyzéséhez hasz-
nos. A layup és dogleg képernyőn megtekinthetjük ezen célpontok távolsága-
it ( „Layup és dogleg távolságok”; 8. oldal ).
1.
Álljunk a menteni kívánt célponthoz közel.
MEGJEGYZÉS! Az aktuálisan kiválasztott lyuktól távol eső célpontok
nem menthetők.
2. A lyuk adatok képernyőn nyomjuk meg a
Introduction
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Getting Started
When using your watch the first time, you should complete these
tasks to set it up and get to know the basic features.
1
Press LIGHT to turn on the watch (
Buttons
, page 1 ).
2
Follow the on-screen instructions to complete the initial
setup.
During the initial setup, you can pair your smartphone with
your watch to receive notifications, sync your activities, and
more (
Pairing Your Smartphone
, page 2 ).
3
Charge the device (
Charging the Device
, page 2 ).
4
Start an activity ( Starting an Activity , page 2 ).
Buttons
LIGHT
• Press to turn the backlight on and off.
• Press to turn the device on.
• Hold to view the controls menu.
UP·MENU
• Press to scroll through the widget loop and menus.
• Hold to view the menu.
DOWN
• Press to scroll through the widget loop and menus.
• Press to view the activity list and start or stop an activity.
• Press to choose an option in a menu.
BACK·LAP
• Press to return to the previous screen.
• Press to record a lap, rest, or transition during a multisport
activity.
• Hold to view the watch face from any screen.
Using the Watch
• Hold LIGHT to view the controls menu.
The controls menu provides quick access to frequently used
functions, such as turning on do not disturb mode, saving a
location, and turning the watch off.
• From the watch face, press UP or DOWN to scroll through
the widget loop.
Your watch comes preloaded with widgets that provide at-a-
glance information. More widgets are available when you pair
your watch with a smartphone.
• From the watch face, press to start an activity or open an
app (
Activities and Apps
, page 2 ).
• Hold MENU to customize the watch face, adjust settings, and
pair wireless sensors.
Viewing the Controls Menu
The controls menu contains options, such as turning on do not
disturb mode, locking the keys, and turning the device off. You
can also open the Garmin Pay
™
wallet.
NOTE: You can add, reorder, and remove the options in the
controls menu (
Customizing the Controls Menu
, page 36 ).
1
From any screen, hold LIGHT .
2
Press
UP
or
DOWN
to scroll through the options.
Enabling Airplane Mode
You can enable airplane mode to disable all wireless
communications.
NOTE: You can add options to the controls menu (
Customizing
the Controls Menu
, page 36 ).
1
Hold LIGHT .
2
Select .
Viewing Widgets
Your device comes preloaded with several widgets, and more
are available when you pair your device with a smartphone.
• Press
UP or DOWN .
The device scrolls through the widget loop and displays
summary data for each widget.
• Press to view widget details.
TIP: You can press DOWN to view additional screens for a
widget, or press to view additional options and functions
for a widget.
• From any screen, hold
BACK
to return to the watch face.
• If you are recording an activity, press BACK to return to the
activity data pages.
Customizing the Watch
• From the watch face, hold MENU to change the watch face.
• From the widget screens, hold
MENU
to customize the
widget options.
• From the controls menu, hold MENU to add, remove, and
reorder the controls.
• From any screen, hold
MENU
to change additional settings.
Introduction 1
gombot.
3. Válasszuk az Egyéni célpontok -at.
4. Válasszuk ki a kívánt célpont típust.
Ütő statisztikai adatainak megtekintése
Játék közben megtekinthetjük az ütőink statisztikai adatait, pl. távolsági és
pontossági információkat, azonban ehhez először vagy párosítanunk kell
Approach
®
CT10 golfütő érzékelőt ( „Ütő érzékelők”; 40. oldal ), vagy engedé-
lyeznünk kell a Ütő adatbevitel ( Club Prompt ) funkciót.
1. Játék közben nyomjuk meg a
Introduction
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Getting Started
When using your watch the first time, you should complete these
tasks to set it up and get to know the basic features.
1
Press LIGHT to turn on the watch (
Buttons
, page 1 ).
2
Follow the on-screen instructions to complete the initial
setup.
During the initial setup, you can pair your smartphone with
your watch to receive notifications, sync your activities, and
more ( Pairing Your Smartphone , page 2 ).
3
Charge the device (
Charging the Device
, page 2 ).
4
Start an activity ( Starting an Activity , page 2 ).
Buttons
LIGHT
• Press to turn the backlight on and off.
• Press to turn the device on.
• Hold to view the controls menu.
UP·MENU
• Press to scroll through the widget loop and menus.
• Hold to view the menu.
DOWN
• Press to scroll through the widget loop and menus.
• Press to view the activity list and start or stop an activity.
• Press to choose an option in a menu.
BACK·LAP
• Press to return to the previous screen.
• Press to record a lap, rest, or transition during a multisport
activity.
• Hold to view the watch face from any screen.
Using the Watch
• Hold LIGHT to view the controls menu.
The controls menu provides quick access to frequently used
functions, such as turning on do not disturb mode, saving a
location, and turning the watch off.
• From the watch face, press UP or DOWN to scroll through
the widget loop.
Your watch comes preloaded with widgets that provide at-a-
glance information. More widgets are available when you pair
your watch with a smartphone.
• From the watch face, press to start an activity or open an
app (
Activities and Apps
, page 2 ).
• Hold MENU to customize the watch face, adjust settings, and
pair wireless sensors.
Viewing the Controls Menu
The controls menu contains options, such as turning on do not
disturb mode, locking the keys, and turning the device off. You
can also open the Garmin Pay
™
wallet.
NOTE: You can add, reorder, and remove the options in the
controls menu (
Customizing the Controls Menu
, page 36 ).
1
From any screen, hold LIGHT .
2
Press UP or DOWN to scroll through the options.
Enabling Airplane Mode
You can enable airplane mode to disable all wireless
communications.
NOTE: You can add options to the controls menu (
Customizing
the Controls Menu
, page 36 ).
1
Hold
LIGHT
.
2
Select .
Viewing Widgets
Your device comes preloaded with several widgets, and more
are available when you pair your device with a smartphone.
• Press
UP or DOWN .
The device scrolls through the widget loop and displays
summary data for each widget.
• Press to view widget details.
TIP: You can press DOWN to view additional screens for a
widget, or press to view additional options and functions
for a widget.
• From any screen, hold
BACK
to return to the watch face.
• If you are recording an activity, press BACK to return to the
activity data pages.
Customizing the Watch
• From the watch face, hold MENU to change the watch face.
• From the widget screens, hold
MENU
to customize the
widget options.
• From the controls menu, hold MENU to add, remove, and
reorder the controls.
• From any screen, hold
MENU
to change additional settings.
Introduction 1
gombot.
2. Válasszuk az Ütő statisztika pontot.
3.
Válasszuk ki a kívánt ütőt.
Pontszámok követése
1. A lyuk adatképernyőjén nyomjuk meg a
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Getting Started
When using your watch the first time, you should complete these
tasks to set it up and get to know the basic features.
1
Press LIGHT to turn on the watch (
Buttons
, page 1 ).
2
Follow the on-screen instructions to complete the initial
setup.
During the initial setup, you can pair your smartphone with
your watch to receive notifications, sync your activities, and
more ( Pairing Your Smartphone , page 2 ).
3
Charge the device (
Charging the Device
, page 2 ).
4
Start an activity (
Starting an Activity
, page 2 ).
Buttons
LIGHT
• Press to turn the backlight on and off.
• Press to turn the device on.
• Hold to view the controls menu.
UP·MENU
• Press to scroll through the widget loop and menus.
• Hold to view the menu.
DOWN
• Press to scroll through the widget loop and menus.
• Press to view the activity list and start or stop an activity.
• Press to choose an option in a menu.
BACK·LAP
• Press to return to the previous screen.
• Press to record a lap, rest, or transition during a multisport
activity.
• Hold to view the watch face from any screen.
Using the Watch
• Hold LIGHT to view the controls menu.
The controls menu provides quick access to frequently used
functions, such as turning on do not disturb mode, saving a
location, and turning the watch off.
• From the watch face, press UP or DOWN to scroll through
the widget loop.
Your watch comes preloaded with widgets that provide at-a-
glance information. More widgets are available when you pair
your watch with a smartphone.
• From the watch face, press to start an activity or open an
app (
Activities and Apps
, page 2 ).
• Hold MENU to customize the watch face, adjust settings, and
pair wireless sensors.
Viewing the Controls Menu
The controls menu contains options, such as turning on do not
disturb mode, locking the keys, and turning the device off. You
can also open the Garmin Pay
™
wallet.
NOTE: You can add, reorder, and remove the options in the
controls menu (
Customizing the Controls Menu
, page 36 ).
1
From any screen, hold LIGHT .
2
Press UP or DOWN to scroll through the options.
Enabling Airplane Mode
You can enable airplane mode to disable all wireless
communications.
NOTE: You can add options to the controls menu (
Customizing
the Controls Menu
, page 36 ).
1
Hold LIGHT .
2
Select .
Viewing Widgets
Your device comes preloaded with several widgets, and more
are available when you pair your device with a smartphone.
• Press
UP or DOWN .
The device scrolls through the widget loop and displays
summary data for each widget.
• Press to view widget details.
TIP: You can press DOWN to view additional screens for a
widget, or press to view additional options and functions
for a widget.
• From any screen, hold BACK to return to the watch face.
• If you are recording an activity, press BACK to return to the
activity data pages.
Customizing the Watch
• From the watch face, hold MENU to change the watch face.
• From the widget screens, hold MENU to customize the
widget options.
• From the controls menu, hold MENU to add, remove, and
reorder the controls.
• From any screen, hold MENU to change additional settings.
Introduction 1
gombot, majd válasszuk az
Eredménylap ot.
Az eredménylap akkor jelenik meg, amikor a greenen tartózkodunk.
2. A DOWN vagy UP gombbal léptethetünk a lyukak között.
3. A
Introduction
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Getting Started
When using your watch the first time, you should complete these
tasks to set it up and get to know the basic features.
1
Press LIGHT to turn on the watch ( Buttons , page 1 ).
2
Follow the on-screen instructions to complete the initial
setup.
During the initial setup, you can pair your smartphone with
your watch to receive notifications, sync your activities, and
more (
Pairing Your Smartphone
, page 2 ).
3
Charge the device ( Charging the Device , page 2 ).
4
Start an activity ( Starting an Activity , page 2 ).
Buttons
LIGHT
• Press to turn the backlight on and off.
• Press to turn the device on.
• Hold to view the controls menu.
UP·MENU
• Press to scroll through the widget loop and menus.
• Hold to view the menu.
DOWN
• Press to scroll through the widget loop and menus.
• Press to view the activity list and start or stop an activity.
• Press to choose an option in a menu.
BACK·LAP
• Press to return to the previous screen.
• Press to record a lap, rest, or transition during a multisport
activity.
• Hold to view the watch face from any screen.
Using the Watch
• Hold
LIGHT
to view the controls menu.
The controls menu provides quick access to frequently used
functions, such as turning on do not disturb mode, saving a
location, and turning the watch off.
• From the watch face, press
UP
or
DOWN
to scroll through
the widget loop.
Your watch comes preloaded with widgets that provide at-a-
glance information. More widgets are available when you pair
your watch with a smartphone.
• From the watch face, press to start an activity or open an
app (
Activities and Apps
, page 2 ).
• Hold MENU to customize the watch face, adjust settings, and
pair wireless sensors.
Viewing the Controls Menu
The controls menu contains options, such as turning on do not
disturb mode, locking the keys, and turning the device off. You
can also open the Garmin Pay
™
wallet.
NOTE: You can add, reorder, and remove the options in the
controls menu (
Customizing the Controls Menu
, page 36 ).
1
From any screen, hold LIGHT .
2
Press UP or DOWN to scroll through the options.
Enabling Airplane Mode
You can enable airplane mode to disable all wireless
communications.
NOTE: You can add options to the controls menu ( Customizing
the Controls Menu , page 36 ).
1
Hold LIGHT .
2
Select .
Viewing Widgets
Your device comes preloaded with several widgets, and more
are available when you pair your device with a smartphone.
• Press
UP or DOWN .
The device scrolls through the widget loop and displays
summary data for each widget.
• Press to view widget details.
TIP: You can press DOWN to view additional screens for a
widget, or press to view additional options and functions
for a widget.
• From any screen, hold BACK to return to the watch face.
• If you are recording an activity, press BACK to return to the
activity data pages.
Customizing the Watch
• From the watch face, hold MENU to change the watch face.
• From the widget screens, hold MENU to customize the
widget options.
• From the controls menu, hold MENU to add, remove, and
reorder the controls.
• From any screen, hold MENU to change additional settings.
Introduction 1
gomb megnyomásával válasszuk ki a kívánt lyukat.
4. A DOWN vagy UP gombokkal adjuk meg a pontszámot.
Az összpontszám frissítésre kerül.
Pontszámok módosítása
1. A lyuk adatképernyőjén nyomjuk meg a START gombot, majd válasszuk
az Eredménylap ot.
2.
A
DOWN
vagy
UP
gombbal léptethetünk a lyukak között.
3. A
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Getting Started
When using your watch the first time, you should complete these
tasks to set it up and get to know the basic features.
1
Press
LIGHT
to turn on the watch ( Buttons , page 1 ).
2
Follow the on-screen instructions to complete the initial
setup.
During the initial setup, you can pair your smartphone with
your watch to receive notifications, sync your activities, and
more ( Pairing Your Smartphone , page 2 ).
3
Charge the device (
Charging the Device
, page 2 ).
4
Start an activity (
Starting an Activity
, page 2 ).
Buttons
LIGHT
• Press to turn the backlight on and off.
• Press to turn the device on.
• Hold to view the controls menu.
UP·MENU
• Press to scroll through the widget loop and menus.
• Hold to view the menu.
DOWN
• Press to scroll through the widget loop and menus.
• Press to view the activity list and start or stop an activity.
• Press to choose an option in a menu.
BACK·LAP
• Press to return to the previous screen.
• Press to record a lap, rest, or transition during a multisport
activity.
• Hold to view the watch face from any screen.
Using the Watch
• Hold LIGHT to view the controls menu.
The controls menu provides quick access to frequently used
functions, such as turning on do not disturb mode, saving a
location, and turning the watch off.
• From the watch face, press UP or DOWN to scroll through
the widget loop.
Your watch comes preloaded with widgets that provide at-a-
glance information. More widgets are available when you pair
your watch with a smartphone.
• From the watch face, press to start an activity or open an
app ( Activities and Apps , page 2 ).
• Hold MENU to customize the watch face, adjust settings, and
pair wireless sensors.
Viewing the Controls Menu
The controls menu contains options, such as turning on do not
disturb mode, locking the keys, and turning the device off. You
can also open the Garmin Pay
™
wallet.
NOTE: You can add, reorder, and remove the options in the
controls menu ( Customizing the Controls Menu , page 36 ).
1
From any screen, hold LIGHT .
2
Press UP or DOWN to scroll through the options.
Enabling Airplane Mode
You can enable airplane mode to disable all wireless
communications.
NOTE: You can add options to the controls menu (
Customizing
the Controls Menu
, page 36 ).
1
Hold LIGHT .
2
Select .
Viewing Widgets
Your device comes preloaded with several widgets, and more
are available when you pair your device with a smartphone.
• Press
UP or DOWN .
The device scrolls through the widget loop and displays
summary data for each widget.
• Press to view widget details.
TIP:
You can press
DOWN
to view additional screens for a
widget, or press to view additional options and functions
for a widget.
• From any screen, hold BACK to return to the watch face.
• If you are recording an activity, press BACK to return to the
activity data pages.
Customizing the Watch
• From the watch face, hold
MENU
to change the watch face.
• From the widget screens, hold MENU to customize the
widget options.
• From the controls menu, hold MENU to add, remove, and
reorder the controls.
• From any screen, hold MENU to change additional settings.
Introduction 1
gomb megnyomásával válasszuk ki a kívánt lyukat.
4.
A
DOWN
vagy
UP
gombokkal módosítsuk az adott lyuk pontszámát.
Az összpontszám frissítésre kerül.
Pontozási módszer beállítása
Beállíthatjuk a készülék által alkalmazott pontozási módszert.
1. A lyuk adatképernyőn nyomjuk le hosszan a MENU gombot.
2.
Válasszuk a tevékenység beállításokat.
3. Válasszuk a Pontozási módszer pontot.
4.
Válasszunk pontozási módszert.
Tudnivalók a Stableford pontozásról
Amikor a Stableford pontozási módszert választjuk ( „Pontozási módszer be-
állítása”; 8. oldal ), a pontok a parhoz képest megtett ütések száma alapján
vannak meghatározva. A kör végén a legnagyobb pontszámmal rendelke-
ző játékos nyer. A készülék a United States Golf Association meghatározá-
sa szerint pontoz .
A Stableford módszerben játszódott kör pontozólapja pontokat mutat ütések
helyett.
Pontok Parhoz képest megtett ütések száma
0 2-vel vagy többel par fölött
1 1-el par fölött
2
Par
3
1-el par alatt
4
2-vel par alatt
5
3-al par alatt
Hendikep beállítása
1. A lyuk adatképernyőn nyomjuk meg hosszan a MENU gombot.
2. Válasszuk a tevékenység beállításokat.
3. Válasszuk az Hendikep pontozás pontot.
4. Válasszunk hendikep pontozási lehetőséget:
• Az összpontszámunkból kivonandó ütések számának megadásához vá-
lasszuk a Helyi hendikep pontot.
• A pálya hendikep kiszámításához szükséges játékos hendikep mutató
és pálya meredekségi besorolás megadásához válasszuk a Mutató/Me -
redekség pontot.
5. Adjuk meg hendikepünket.