Garmin Apollo CNX80 Pilot'S Manual Download Page 51

Page: 51 / 162

Basic Operation

Airport Frequency Information

Additional information is available for Airport Frequencies that have an asterisk (*) by the frequency type.

1. Turn the

Large

knob to highlight the desired frequency. Frequencies with an asterisk will have more

information available.

2. Press the

Freq

key again to display more information, such as time of operation, bearings, runways, and

other comments. The

Freq

key will now be half highlighted.

3. Turn the

Large

knob to scroll through the list of frequencies for that airport while still displaying the

extra information. Blue arrows on the right side of the display will show the direction where more

frequencies are available.

4. Press the

Freq

key again to return to the frequency list.

Info Mode - Airport Information

Info Mode - Frequency Information

Info

Press the Freq key for frequency details

Turn the Large knob for detail on more frequencies

Summary of Contents for Apollo CNX80



































































































































































Search results

Summary of Contents for Apollo CNX80

Reviews:

Related manuals for Apollo CNX80

Brands by name

Popular brands

Garmin Apollo CNX80, Pilot'S Manual

Search results

Summary of Contents for Apollo CNX80

Reviews:

Related manuals for Apollo CNX80

Brands by name

Popular brands