Garmin Apollo CNX80, Pilot'S Manual

Page: 124 / 162

116
Basic Operation
Minimum Brightness Value
When the Display Brightness selection is set to Automatic, the Minimum Brightness value can be set between
0.20 and 130.00 foot-lamberts of light.
1. Turn the Large knob to highlight the Minimum Brightness selection.
2. Press the
CRSR
knob in to start editing.
3. Turn the Small knob to change the value.
4. Press the
CRSR
knob in again or press the
Menu/Enter
key to save the value.
Message Tone
The Message Tone selection allows you to turn the audio annunciator for messages to low, medium, high, or
off. Set the AMA value to an adequate level first and then setting this value so the “ding” volume is adequate.
1. Turn the
Large
knob to highlight the Message Tone selection.
2. Press the CRSR knob in to start editing.
3. Turn the
Small
knob to change the value.
4. Press the CRSR knob in again or press the Menu/Enter key to save the value.
Airspace Alerts
The Airspace Alerts selection allows you to turn Airspace Alerts on or off. When alerts are turned on, a message
will be given when select airspaces are entered.
1. Turn the
Large
knob to highlight the Airspace Alerts selection.
2. Press the CRSR knob in to start editing.
3. Turn the
Small
knob to change the value.
4. Press the CRSR knob in again or press the Menu/Enter key to save the value.
Setting Minimum Brightness Value
Setting Message Tone Volume Level
Turning Airspace Alerts On/Off
System