![background image](http://html1.mh-extra.com/html/garland/mwe-9501/mwe-9501_operation-manual_564375022.webp)
If you have version 7.30 EPROM chip software, your
controller is equipped with the new Multi-stage cooking
feature.
With Multi-Stage cooking, the product being cooked is
cooked using multiple gap settings for a selected period of
time.
For example, during 4:1 cooking, the platen would normally
gap at a gap setting of .416 (Four-hundred and sixteen
thousands) for the entire length of the cook cycle.
With multi stage cooking, the platen may gap at the
beginning of the cook cycle for .416 for only 20 seconds. At
the interval of 21 seconds, the gap may change to .400 for
another 25 seconds.
At the 46 second interval (in the remove time), the platen
may regap at .420.
NOTE: the above mentioned example is IS NOT the
McDonalds multi gap formula for 4:1 cooking.
All of the "CLAM" menu items programmed in this 7.30
eprom chip have options to cook using the multi-stage gap
feature.
Currently, 10:1 - CLAM, and 4:1 - CLAM are the only menu
items with a factory default program with multiple gaps.
Please see table to right showing additional stages for these
products.
Multi-Stage Cooking
1. PRESS the "MENU" button to obtain the menu "CLEAN
MODE." (The controls will maintain the proper cleaning
temperature).
2. "READY TO CLEAN" will be displayed when the grill
is at the proper cleaning temperature and an audible
alarm will sound. Press the "MENU" button to display
"OFF." The "OFF" position on the controllers allows the
operator to raise and lower the upper platens to alternate
positions for proper cleaning of the side and rear edges
of the platens.
3. When cleaning is completed, you may turn the "MASTER
POWER" (rocker) switch off.
NOTE: Be sure to check upper platen safety pin is disengaged
(pulled out) prior to pushing grill back under grill.
To Clean the Grill:
Breakfast to Lunch Transition (Transition
Cooking)
Approximately 30 minutes before
changing
to
the
lunch
menu
, perform the following:
1.
PRESS
the
"TEMP"
button (to display the upper platen
temperature).
2.
Press
the
"UP ARROW"
( ↑
) button.
3. The
upper platen indicator will light
(AMBER) and
maintain the
normal operating
(set)
temperature.
PRODUCT
FUNCTION
TIME
GAP
(MULTI ACTIVE)
TOAST
BUNS TIME
TOP
TEMP
BOTTOM
TEMP
10:1 - CLAM
REMOVE IN
37
.265
0
425ºF
218ºC
350ºF
177ºC
STAGE #1
5
.245
STAGE #2
0
0
STAGE #3
0
0
4:1
REMOVE IN
107
.425
0
425ºF
277ºC
350ºF
177ºC
STAGE #1
10
.400
STAGE #2
0
0
STAGE #3
0
0
THE TABLE ABOVE REPRESENTS THE 2 MENU ITEMS THAT HAVE A FACTORY DEFAULT
SETTING FOR MULTI STAGE COOKING.
*** ONLY AVAILABLE IN 7.XX ***
FOR INFORMATION REGARDING ALL MENU ITEMS, AND THEIR DETAILED LISTING OF
FUNCTIONS, SEE “CONTROLLER MENU ITEMS”
NORMAL OPERATING MODES
Summary of Contents for MWE-9501
