![background image](http://html1.mh-extra.com/html/garland/mwe-9501/mwe-9501_operation-manual_564375024.webp)
1. PRESS
and
HOLD
the
“PROG”
button for
five, (5),
seconds
. (Display will flash GC450 and the program
version number).
2. PRESS
the
“PROG”
button
twice
to display
“SYSTEM
SETUP”
.
3. PRESS
the
“MENU”
button to display
“DISPLAY
TEMP. IN : ºF/ºC”.
4. PRESS
the
“UP ARROW”
button ( ↑ ) to change
ºF or
ºC.
5. PRESS
the
“PROG”
button to display
“SYSTEM
SETUP”.
6. PRESS
the
“RIGHT ARROW”
button (→) to
return to
the normal
OPERATING MODE.
1. PRESS
and
HOLD
the
"PROG"
button for
five, (5),
seconds
. (Display will flash GC450 and the program
version number).
2. PRESS
the
"PROG"
button
twice
to display
"SYSTEM
SETUP".
3. PRESS
and
HOLD
the
"UP ARROW"
( ↑
) button for
ten, (10), seconds
,
"GAP CALIBRATION"
will be
displayed.
4. PRESS
the
"UP ARROW"
button ( ↑ ) again, the
"+"
(PLUS)
button
to increase
the value
OR
the
"RIGHT
ARROW"
button (→),
"-" (MINUS)
to decrease
the
value.
5. PRESS
the
"PROG"
button to display
"SYSTEM
SETUP".
6. PRESS
the
"RIGHT ARROW"
button (→),
to return
to the normal
OPERATING MODE.
24
1. PRESS
and
HOLD
the
“PROG”
button for
five, (5),
seconds
. (Display will flash GC450 and the program
version number).
2. PRESS
the
“PROG”
button
twice
to display
“SYSTEM
SETUP”.
3. PRESS
the
“MENU”
button to display
“ALARM
VOLUME”.
4. PRESS
the
“UP ARROW”
button (
↑
) to
change
(HIGH/LOW).
5. PRESS
the
“PROG”
button to display
“SYSTEM
SETUP”.
6. PRESS
the
“RIGHT ARROW”
button (
→
) to
return
to
the normal
OPERATING MODE.
1.
PRESS
and
HOLD
the
“PROG”
button for
five, (5),
seconds
. (Display will flash GC450 and the program
version number).
2.
PRESS
the
“PROG”
button
twice
to display
“SYSTEM
SETUP”.
3.
PRESS
and
HOLD
the
“UP ARROW”
( ↑
) button for
ten, (10), seconds
,
“GAP CALIBRATION”
will be
displayed.
4. PRESS
the
“MENU”
button. The hold feature will
display “OFF”.
5. HOLD the “RIGHT ARROW”
(→) for ten, (10),
seconds, the “OFF WILL FLASH”.
6. PRESS the “UP ARROW” (
↑
) to change the safety
(ON/OFF).
7. PRESS
the “PROG” button to display “SYSTEM
SETUP”.
8. PRESS
the “RIGHT ARROW” button (→) to return to
the normal
OPERATING MODE.
PROGRAMMING
To Enable / Disable Start Delay
To Change the Gap Calibration
To Change the Speaker Volume (High / Low)
To Display Temperatures in F or C
SYSTEM SETUP
Summary of Contents for MWE-9501
