![background image](http://html1.mh-extra.com/html/garland/mwe-9501/mwe-9501_operation-manual_564375015.webp)
15
6. Install existing rod through opening on teflon sheet as
previously done with existing rod and sheet.
7. Clip existing teflon bar in rear of platen as previously
done with existing rod and sheet.
8. Fold corner edges of front of teflon sheet approximately
1 inch on top and side, and insert folded sheet through
opening in Teflon rollup.
Upper Platen (Side View)
Release Material Hook
Release Material Rod
Release Material Sheet
9. Once inserted, pull through and hold Teflon sheet in
center, and turn the tightening knob clockwise (for
right platen) and counter-clockwise (for left platen).
10. Once tight, turn locking knob in opposite direction of
tightening knob.
RELEASE MATERIAL INSTALLATION (OPTIONAL)
Summary of Contents for MWE-9501
