Part Number 4532415 Rev 5 12/15 27
CUT-OUT DIMENSIONS: COUNTER-TOP
See Dimensions: Mounting Frames on page 24
CUT-OUT DIMENSIONS: HOLES AND STUDS FOR CONTROL / OPERATION UNIT
Use the dimensional guide below to create holes and studs to mount the control unit and the operation units. Mount the
units either together on the same panel or on separate panels.
Mounting brackets are provided to install the control unit. Note that the control unit can be mounted in different
orientations (see X and Y versions in the drawings below).
Measurements in mm and [inch].
min.
min.
with EMI
min.
without EMI
min.
with EMI
30 [1.18]
226 [8.96]
27 [1.06]
57 [2.24]
125 [4.92]
155 [6.1]
30 [1.18]
101 [3.98]
14 [0.55]
28 [1.10]
14 [0.55]
10.2 [0.4]
5 [1.2]
8.2 [0.32]
38 [1.50]
5 [1.2]
A
A
1
2
3
X
X
Y
Y
X
Y
M4 / M5
4
4
4
4
4
4
4
4
1
Operation Unit
2
Control Unit (with or without EMI. EMI is optional)
3
Studs or welded bolts, to mount the control unit. Size, M4 or M5 studs or bolts.
4
Mounting brackets can be inserted into the locations as shown. Two brackets are shown as an example.
A
Detail A. Holes required for mounting the operation unit.
X
Detail X. Locations for studs/bolts for the corresponding mounting versions shown.
Y
Detail Y. Locations for studs/bolts for the corresponding mounting versions shown.