24
Part Number 4532415 Rev 5 12/15
DIMENSIONS: MOUNTING FRAMES
IMPORTANT: Factory supplied frames are intended for installations on counter-tops 1.5mm to 3mm thick [16- to
10-gauge].
NOTE: For counter-top thickness of 20mm to 30mm [1”] or stone countertop installation, please contact Factory for
assistance.
NOTE: Countertop cut-out dimensions, noted in the drawings, include 4mm gap per side for silicone sealant.
Dimensions: Mounting Frame for Glass Size 360x360mm
Measurements in mm and [inch].
1
Counter-top cut-out dimension
2
Hole for installing the mounting frame
3
M4 threaded hole, to level the glass-top
4
Holding rail, to support the coil carrier sheet
5
M4 threaded hole, to level the coil carrier sheet
1
3
4
5
1
8x
(8x)
(4x)
2
