3.
Safety regulations
3-2
Unauthorized changes to the machine are
not permitted for safety reasons.
Genuine MAKO parts were especially
designed and selected for this unit. The
installation and/or use of any parts other
than genuine MAKO parts can therefore
affect the active and/or passive safety and
reliability of this unit.
The manufacturer is not liable for damage
resulting from the use of non-genuine MAKO
parts or special accessories. This applies
also to the installation and setting of safety
equipment and valves as well as to welding
on structural or pressurized parts.
In addition to the general technical
operation in accordance with the
stipulations of the local authorities, we
would like to refer in particular to the
following regulations.
For the lifting of this unit, a suitable lifting
mechanism is to be used, which meets the
local safety regulations. All loose or
moveable parts must be safely secured
before the unit can be lifted. It is strictly
prohibited to stay in the danger zone of a
lifted load.
The correct method of lifting (according to
the operating instructions of the load
suspension device) has to be ensured.
All blind flanges, plugs, caps and bags with
drying agent have to be removed prior to
the installation of the pipes. Distributing
pipes and pipe connections have to be of
the proper size and suitable for the relevant
operating pressure.
The system has to be installed in such a
way that it is adequately accessible.
3.4
Installation And Normal
Operation
For the execution of maintenance work,
tools and workshop equipment adapted to
the task at hand are absolutely necessary.
The personnel must be made familiar with
the location and operation of fire
extinguishers! Observe all fire-warning and
fire-fighting procedures!
Work on or with the unit must be carried
out by reliable personnel only. Statutory
minimum age limits must be observed!
Employ only trained or instructed personnel
and clearly set out the individual limits and
responsibilities of the personnel for
operation, set-up, maintenance and repair!
Ensure that only authorized personnel work
on or with the unit!
Define the machine operator's
responsibilities giving the operator the
authority to refuse instructions by third
persons that are contrary to safety
regulations.
Do not allow persons to be trained or
instructed or persons taking part in a
general training course to work on or with
the unit without being continuously
supervised by an experienced person!
Work on the electrical equipment of the unit
must be carried out only by a skilled
electrician in accordance with electrical
engineering rules and regulations.
Work on system elements such as high
pressure hoses may only be carried out by
personnel with special knowledge and
experience.
Do not make any changes, modifications or
attachments to the unit, which could affect
safety, without the supplier's prior
permission!
Selection And Qualification Of
Personnel; Basic Responsibilities
3.3
Changes And Modifications
To The Unit
Summary of Contents for Mako SCFS
