3.
Safety regulations
3-4
Never operate the system at pressures
which exceed the inlet pressure or fill
pressure(s) as stated on the units
nameplate.
All access panels have to be closed at all
times during the operation of this unit.
Check the unit at the beginning of each
startup and at least once every 8 hours of
operation for visible damage or problems.
Report any problems or changes in the
machine's operating behavior to the
responsible department or person
immediately. In the case of any problem
which might effect the safe operation of this
unit, stop the unit immediately! Have any
problem resolved before restarting the unit!
Follow the operating procedures according
to the operating instructions.
Follow the adjusting, maintenance and
inspection activities and schedule set out in
the operating instructions, including
information on the replacement of parts and
equipment. These activities must only be
carried out by skilled personnel, under
qualified supervision.
Brief the personnel operating the unit prior
to starting any special operations or
maintenance work! Appoint a person to
supervise the activities!
Maintenance and repair work may only be
carried out under the supervision of a
person who is qualified to do the work.
Inspection, maintenance and repair work
may only be carried out with the unit being
at rest and depressurized. Protective
equipment to be removed for this work has
to be properly refitted after completion of
these activities.
The use of this unit without protective
equipment is not permitted. During
maintenance and repair when working on a
running unit, working clothes have to be
close-fitting.
Always use the correct tools for
maintenance and repair work.
3.5
Special Work/Maintenance
Never use inflammable solvents or carbon
tetrachloride to clean parts. Take
precautions against poisonous vapors from
cleaning agents.
In any work concerning the operation,
conversion or adjustment of the unit and its
safety-oriented devices or any work related
to maintenance, inspection and repair,
always observe the operating procedures
set out in the operating instructions and the
information on maintenance work.
Ensure that the maintenance area is
adequately secured.
Summary of Contents for Mako SCFS
