4.
Layout and function
4-3
fig. 4.3-1 Overall View
4.3
Panel Layout
1. - * To Bank - These valves control the
flow between the compressor and the
individual Banks.
2. - * Bank Pressure - These gauges will
give you the pressure in each individual
Bank.
3. - * From Bank - These valves control the
flow between the individual banks and the
Regulator(#6).
* - Cascade fill panels may be setup for
from 2 to 6 Banks depending on the size of
the unit and the options purchased.
4. - Inlet Pressure - This Gauge will read the
pressure at the inlet of the Regulator(#6).
5. - Bypass - This valve can Bypass all
storage and connect the inlet of the
Regulator(#6) directly to the compressor.
6. - Regulator - This devise can be set to
reduce the storage or compressor pressure
to the proper fill pressure.
7. - Auxiliary Outlet - This connection will
allow this unit to be connected to a
secondary fill station or be used to fill other
storage or as a air sample test port.
8. - Outlet Pressure - This Gauge will read
the pressure at the outlet of the
Regulator(#6).
9. - Auxiliary Fill - This valve can control the
flow of air to the Auxiliary Outlet
connection.
10. - Bottle Pressure - This Gauge will read
the pressure going to the bottle(s) in the
Containment Shield Box Drawer(see section
4.2 - #4).
11. - Fill Valve - This Valve will control the
flow of air going to the bottle(s) in the
Containment Shield Box Drawer(see section
4.2 - #4).
1
2
3
4
5
6
7
8
9
10
11
Summary of Contents for Mako SCFS
