![background image](http://html1.mh-extra.com/html/gardner-denver/governor-ten014983/governor-ten014983_user-manual_3581592076.webp)
13-17-621 Page 76
4.4.3 Delcos Protocol:
The
Delcos
protocol
is the native protocol for Gardner Denver machines using the
GD Pilot, GD Pilot TS,
GD Pilot XTC, Delcos Pro, Delcos XL,
and
Delcos XXL
controllers. If you are connecting to other Gardner
Denver compressors with one of these controllers, this is the protocol that should be used. It is also the
protocol to select if you are using a Gardner Denver
Connect 12™
system controller.
Figure 103: Delcos Protocol Sequencing Settings
4.5 Timer Control
The
Timer Control
feature allows the compressor operation to be modified based on a time schedule.
There are two schedules available, one to control starting and stopping of the machine and another to
activate the secondary pressure band. Table 35 below lists the timer control settings available under this
menu.
Table 35: Timer Control
Timer Control Setting
Setting
Sub-Menu
Short Description
Timer Control
Set Date, Time
and Time Zone
The User can set the Date, Time and Timezone on this
screen.
Pressure Band
p2 setting
The User can set the schedule for the secondary pressure
band.
Timer Start and
Stop setting
The User can set the schedule to control the starting and
stopping of the compressor.
Figure 104 shows the main screen for the
Timer Control
Settings.