![background image](http://html1.mh-extra.com/html/gardner-denver/governor-ten014983/governor-ten014983_user-manual_3581592171.webp)
13-17-621 Page 171
Figure 187: Analog Outputs
6.4 Controller
The
Controller
section of the
Diagnostics
menu gives information about controller, its operation, and
running status. This is also a place where the software can be updated. A list of the sub-menus under the
Controller
menu and a description of each can be found in Table 48 below.
Table 48: Controller Menus
Controller
Sub-Menu
Brief Information
The user can see general information about the controller and access the update software
interface.
The user can download the controller logs onto a flash drive.
The user can view information about the status of the controller and its operation.
The user can see the current software version being used and update the controller software to the
latest version.
The user can view a record of all the changes made to the system.
The user can view the system logs and select a specific logger.
Lists files on the controller and the size of each folder in the structure.
6.4.1 General:
below shows the Controller’s
General
Info. This includes:
Total motor starts, IO module Serial
Number, Controller Serial Number, Controller Software Version, Controller Software ID, AR Version, DC
Supply, Build ID,
and
Build Timestamp
.
Along with above information, there is an
Update Software
button. Refer to Section 6.4.4 Update Software
for more information on updating the controller software.
The
DC Supply
is the current value of the control voltage and can be useful in troubleshooting. The other
values may be referenced by Gardner Denver Support to determine if a software update should be
performed on the controller.