![background image](http://html1.mh-extra.com/html/gardner-denver/governor-ten014983/governor-ten014983_user-manual_3581592089.webp)
13-17-621 Page 89
Table 39 below lists the signals available on the
Temperature Inputs
screen and a brief description of their
function.
Table 39: Temperature Inputs
Temperature Inputs
Signal Name
Function
Separator Temperature
This temperature signal monitors the temperature after the air-oil separator. If
assigned, the controller will monitor this input for temperature-based warnings and
faults using the same warning and fault levels configured for the machine discharge
temperature.
Dryer Temperature
This temperature signal monitors the temperature of an external dryer for warning or
fault. When this function is assigned, additional temperature values can be set on the
Settings -> Advanced -> Operating Limits page.
Enclosure Temperature
This temperature signal monitors the temperature of the package enclosure for
warning or fault. When this function is assigned, additional temperature values can
be set on the Settings -> Advanced -> Operating Limits page.
4.6.4 Analog Inputs:
The
Analog Inputs
settings page allows the user to configure optional analog inputs to the controller.
Figure 121 below shows the
Analog Inputs
tab.
Figure 121: Analog Inputs
Table 40 below lists the signals available on the
Analog Inputs
screen and a brief description of their
function.
Table 40: Analog Inputs
Analog Inputs
Signal Name
Function
Sequence System
Pressure
This input is used in the AirSmart sequencing protocol to monitor the pressure at the
common tank connected to the compressors in the network.