![background image](http://html1.mh-extra.com/html/gardner-denver/governor-ten014983/governor-ten014983_user-manual_3581592073.webp)
13-17-621 Page 73
directed by Gardner Denver service or engineering. One can select the required logging level with the drop
down menu as shown in Figure 98 below.
Figure 98: Logging Level
Firewall Status:
The
Firewall Status
setting can be either enabled or disabled with the toggle button. Figure 99 below
shows the Firewall
Enable
status. There are specific communication instances where the firewall will need
to be disabled on the controller to provide the required access for qualified personnel. The firewall will revert
to enabled when the controller is rebooted. Do not change this setting unless directed by Gardner Denver
service or engineering.
Figure 99: Firewall Status