![background image](http://html1.mh-extra.com/html/gardner-denver/governor-ten014983/governor-ten014983_user-manual_3581592155.webp)
13-17-621 Page 155
P.313
Warning
Remote speed
control open
fault
Remote speed control
input is faulty, the wiring
to the sensor is broken,
or the wiring or
connector is
disconnected.
Using the wiring schematic for the machine,
locate the Remote speed control input connection
to the controller. Check for any shorted wires at
the connector. Inspect the cable for damage
between the controller and the Remote speed
control. Replace or repair the wiring or sensor
depending on the results of the findings.
Service Alarms
S.0
Warning
Service Warning
The machine is due for
servicing.
Perform the respective service task and reset the
timer in the controller once the task is complete.
Locate the Distributor info tab in the control
settings to schedule a maintenance visit by a
certified technician.
S.1
Warning
Air Filter
maintenance
warning
Air Filter Maintenance
required. The service
timer for the air filter has
run out and the machine
is due for servicing.
Change the air filter and reset the timer in the
controller when the change is complete.
S.2
Warning
Oil Filter
maintenance
warning
Oil Filter Maintenance
required. The service
timer for the oil filter has
run out and the machine
is due for servicing.
Change the oil filter and reset the timer in the
controller when the change is complete.
S.3
Warning
Oil change
maintenance
warning
Oil Change required. The
service timer for the oil
has run out and the
machine is due for
servicing.
Change the Oil in the machine following the
service instructions. Reset the timer after the
change is complete.
S.4
Warning
Oil sample
maintenance
warning
Oil Sample Service
required. The service
timer for taking an oil
sample has expired.
Perform the Oil sample service following service
instructions. Reset the timer in the controller once
the change is complete.
S.5
Warning
Separator
maintenance
warning
Separator service
required. The service
timer for performing
separator maintenance
has expired.
Perform the Separator maintenance and reset the
timer in the controller once the maintenance is
complete
S.6
Warning
Motor
Lubrication
maintenance
warning
Motor lubrication service
required. The service
timer for the motor
lubrication has expired
and it is time
Change the Motor Lubrication in the machine and
reset the timer in the controller when the change
is complete.
S.7
Warning
Control Box filter
maintenance
warning
Control box filter service
required. The control box
filter service timer has
expired.
Change the control box air filter. Once a new air
filter is installed, reset the timer in the controller.
S.8
Warning
Drive Belt
maintenance
warning
Drive belt service
required. The service
timer for drive belt
maintenance has
expired.
Perform the drive belt maintenance on the
machine and reset the timer in the controller once
complete.
S.9
Warning
Bearings
greasing
maintenance
warning
Bearings greasing
service required. The
service timer for the
bearings greasing
service has expired.
Perform the Bearing greasing maintenance and
reset the timer in the controller once the
maintenance is complete.
S.10
Warning
Compressor
overhaul
Compressor overhaul
service required. The
service timer for a
Perform the Compressor overhaul service on the
machine and reset the service timer on the
controller when complete.