![background image](http://html1.mh-extra.com/html/gardner-denver/governor-ten014983/governor-ten014983_user-manual_3581592065.webp)
13-17-621 Page 65
Figure 85: Dryer Pre-Run Time
When the compressor is started by local or remote control, it will activate the dryer start programmable
output and then wait for the duration of the
Dryer Pre-Run Time
before starting the compressor motor.
4.3 Configuration
Table 32 below gives a brief overview of the available configuration settings. Figure 86 shows the
Configuration
menu selection on the controller. This section of the controller contains settings that are not
related to the control of the machine.
Table 32: Configuration Setting
Configuration Settings
Setting
Sub-Menu
Short Description
Configuration
The User can see and set the Pressure Units, Temperature Units, Flow
Units, and Language under this section
The User can set the time, date, and time zone.
The User can set or edit the following parameters: Ethernet
Configuration Mode, IP Address, Subnet Mask, and Gateway Address.
The RS485 settings can also be configured here.
This screen allows changing and resetting passwords.
The User can set and select the logging level and temporarily disable
the Firewall.