![background image](http://html1.mh-extra.com/html/gardner-denver/governor-ten014983/governor-ten014983_user-manual_3581592092.webp)
13-17-621 Page 92
Figure 123: Advanced Setup
4.7.1.1 Model:
The
Model
button on the advanced setup menu brings the user to the
Machine Definition
and
Configuration
files selection screen. This is where machine configurations are loaded based on the system requirements
and type of machine being set up. Hit the
Model
button on the
Setup
home screen as shown in Figure 123:
Advanced Setup above. The
Model
selection screen that comes up is shown in Figure 124 below.
A combination of two configuration files are used to configure the controller for a particular machine model.
The first file that must be loaded is the
Machine Definition
file, this specifies the type of machine, the IO
mapping, and the features of the machine. The second file that is loaded is the
Machine Config File
, this
specifies a particular variant of the chosen machine, for example the voltage and power variant for a variable
speed machine.