TM
Additional controls
8
January 2015
USA
53 /80
Trends
VSD Output Current
Fig. 8-3: "
VSD Output Current
" trend chart
The chart shows the time curve of the output cur-
rent of the frequency converter.
8.3
Resetting Statistics On-Load
Hours
At maintenance level, the history (recorded data)
of the on-load hours can be reset (deleted) in the
"
Statistics On-load Hours
" chart.
1
Press the <
Trends
> tab.
2
Use the <arrow buttons> to call up the "
Statis-
tics On-Load Hours
" trend chart.
– On maintenance level, the <
Re-Set Statis-
tics
> button is enabled.
Trends
Statistics On-Load Hours
Volume Flow
Average Volume Flow
Since Re-Set on 20 Mar.2013 at 13:39 hrs.
Re-Set
Statistics
Fig. 8-4: "
Statistics On-Load Hours
" trend chart (example
RS
)
3
Press the <
Re-Set Statistics
> button.
– The confirmation question "
Are you sure
you want to re-set the Statistics Data?
" ap-
pears.
Trends
Statistics On-Load Hours
No
Yes
Are you sure you want to
re-set the Statistics Data?
Fig. 8-5: Confirmation question "
Are you sure you want
to re-set the Statistics Data?
"
4
Press <
Yes
> button.
✓
The recording of on-load hours is reset.
– The bar chart is deleted.
– The details in the text are updated.
or
5
Press <
No
> button.
– The recording of on-load hours is kept.
In both cases, the "
Statistics On-Load Hours
"
trend chart is displayed again.
8.4
Set the Service interval
The time until the next Service is due (Service in-
terval) can be set in the "
Hour Meters
" menu at
the Service level.
1
Press the register card <
Settings
>.
– The "
Settings
" screen appears.
2
Press the <
Hour Meters…
> button.
– The "
Hour Meters
" menu appears.
3
Press the <
Hours to next Service
> button.
– The "
Hours to next Service
" input menu ap-
pears.
Summary of Contents for GD PILOT TS Series
Page 78: ...TM 78 80 USA January 2015...
Page 79: ...TM January 2015 USA 79 80...