Fig. 3a
Fig. 3b
Fig. 4a
12
Assembly and Parts List
3
Before starting the equipment
1
Fitting the steady grip (Fig. 3a-3c)
Fit the steady grip (3) as shown in Figures 3a-3c. Do not tighten the screw (Fig./Item 20)
until you have set the optimum working position with the carrying strap (Fig.2/Item 17)
(see also under 'Setting the cutting height' on page 17). The steady grip should be aligned
as shown in Figure 1. To dismantle, proceed in reverse order.
2
Fitting the long handle (Fig. 4a-4c)
Pass the handle screw (Fig.2/Item 32) through the washer (Fig.2/Item 34) and into
the connecting piece of the long handle (1). Secure the handle screw loosely with the
nut (Fig.2/Item 33). Now press the locking lever (A) and push the long handle (Fig. 4a/
Item 2) carefully into the connecting piece for the long handle. While doing so, ensure
that the drive shafts on the inside of the long handle slide into each other (turn the
line spool (13) / cutting blade (Fig.2/Items 18a & 18b) gently if required). The lug of the
locking lever (A) must latch into the hole (B). Now tighten the handle screw as shown in
Figure 4c. To dismantle, simply slacken the handle screw and actuate the locking lever.
Fig. 3c
GB
IRE
MODEL: GLBC 43
AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk