manualshive.com logo in svg

Gardeline 2 in 1 Petrol Grass Trimmer/Brush Cutter, Operating Instructions & User Manual

Share
Download
Gardeline 2 in 1 Petrol Grass Trimmer/Brush Cutter Operating Instructions & User Manual Download Page 19

19

8

 

  

Fuel and oil – Recommended fuels

  

Use only a mixture of unleaded petrol and special 2-stroke engine oil. 
Mix the fuel mixture as indicated in the fuel mixing table.

 IMPORTANT! 

Do not use a fuel mixture which has been stored for longer than 90 days.

IMPORTANT!

 Never use 2-stroke oil with a recommended mixing ratio of 100:1. 
The manufacturer’s warranty will be voided in case of engine damage 
due to inadequate lubrication.

IMPORTANT!

 Only use containers designed and approved for the purpose to transport and 
store fuel. Pour the correct quantities of petrol and 2-stroke oil into the mixing 
bottle  provided (see scale printed on the bottle). Then shake the bottle well.

9

 

  

Fuel mixing table

 

Mixing Procedure: 40 parts petrol to 1 part oil 

Petrol

2-stroke oil

1 litre

25 ml

5 litres

125 ml

GB

IRE

MODEL: GLBC 43

AFTER SALES SUPPORT

0151 649 1500

1890 946244

www.einhell.co.uk

Assembly and Parts List 

3

Summary of Contents for 2 in 1 Petrol Grass Trimmer/Brush Cutter









































Reviews:

No comments

Brands by name

Popular brands

Load more brands