24
Instructions
5
GB
IRE
MODEL: GLBC 43
AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
PLEASE NOTE!
Even if it is used carefully, cutting around foundations, stone or concrete
walls, etc. will result in the line suffering more than the normal level of wear.
Trimming/cutting (with line spool/cutting blade)
Swing the equipment from side to side in a scything motion. Always keep the
cutting tool parallel to the ground.
Check the site and decide which cutting height you require. Guide and hold
the cutting tool at the required height to ensure that you cut evenly (Fig. 9d).
Low trimming (with line spool)
Hold the equipment right in front of you at a slight angle so that the underside
of the line spool is above the ground and the line strikes the correct target.
Always cut away from yourself. Never draw the equipment towards yourself.
Cutting along fences/foundations (with line spool)
Approach wire mesh fences, lath fences, natural stone walls and foundations
slowly so that you can cut close to them without striking the obstacle with the
line. If, for example, the line strikes stones, stone walls or foundations, it will
wear or fray. If the line strikes wire fencing, it will break.
Trimming around trees (with line spool)
When trimming around tree trunks, approach slowly so that the line does not
strike the bark. Walk around the tree and take care not to damage the tree.
Approach grass or weeds with the tip of the line and tilt the line spool
forwards slightly.
Fig. 9c
Fig. 9d
