23
Instructions
5
Practical tips
Practice all the work steps with the engine switched off before you start to
use the equipment.
Extending the cutting line
CAUTION!
Do not use any kind of metal wire or metal wire encased in plastic in the line
spool. This may cause serious injuries to the user.
To extend the cutting line (13), run the engine at full speed and tap the line
spool on the ground.
This will automatically extend the line. The blade on the guard hood will cut
the line to the permissible length (Fig. 9b).
IMPORTANT!
Remove all grass and weed remnants at regular intervals to prevent the
equipment from overheating.
Grass and weed remnants become trapped under the guard hood (Fig. 9c)
and prevent the equipment from cooling sufficiently. Remove the remnants
carefully using a screwdriver or the like.
Different cutting methods
When the equipment is correctly assembled it will cut weeds and long grass in
places which are difficult to access, e.g. along fences, walls and foundations and
also around trees. It can also be used for 'mowing' down vegetation so that a
garden can be better prepared or a certain area cleared down to the soil.
Fig. 9a
Fig. 9b
GB
IRE
MODEL: GLBC 43
AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
