TR-HT2xx LED Controller - User Manual
On this page you can set the mode (continuous, pulsed, or switched), the
light's brightness and pulse settings. You must click the
Submit
button to
effect any changes you make.
Click the
Refresh
button at the bottom of the screen to update the
measurements being taken.
The configuration page is shown below.
11.3
General setup page
On the general setup page (shown below), you can set a password for the
TR-HT and send it commands. Refer to
for the commands you can use to operate the TR-HT.
11.4
Digital output configuration page
There is one configuration page for each digital output channel. All the
parameters for each output channel can be set up. The modes available
on a digital output areshown in the illustration below (refer to
). Pressing the
Submit
button updates the TR-HT
configuration and saves the changes to non-volatile memory.
—
47
—
