GAT Vending 6100 BA
Installation
14
HB_GAT-VENDING6100BA--EN_121
www.gantner.com
3.3 Installation in Vending Machines without Standard Cutouts
► Position the plastic mounting plate on the outside of the vending machine in the correct orientation as shown in
► Mark the positions of the three mounting holes (2 in Figure
► Drill the three mounting holes in the outer wall of the vending machine.
► Attach the plastic mounting plate to the front of the vending machine using the three M3 x 8 mm bolts and
accompanying nuts and washers that are included with the GAT Vending 6100 BA.
► Ensure the plastic mounting plate is firmly attached and the bolts are tightened.
1 ....... Plastic mounting plate
2 ....... 3 x mounting holes
3 ....... Opening for cable access
4 ....... 3 x M3 nuts
5 ....... 3 x washers
6 ....... 3 x M3 x 8 mm bolts
Figure 3.4 - Installation of the plastic mounting plate for vending machines without standard EVA cutouts
Summary of Contents for GAT Vending 6100 BA
Page 2: ......
Page 46: ...GAT Vending 6100 BA Technical Data 46 HB_GAT VENDING6100BA EN_121 www gantner com ...
Page 47: ......