G&D VisionXS-IP-F-DP-UHR, Installation And Operation Manual

Page: 207 / 232

Configuration
G&D VisionXS-IP-F-DP-UHR · 86
English
Reinitialising USB input devices
When you connect a USB keyboard or mouse to the KVM extender, the input
device is initialized and ready for use.
Some USB input devices require the USB connection to be re-initialized after a
period of time. Enable automatic re-initialization of USB input devices if a USB
keyboard or mouse stops responding to your input during operation.
How to enable/disable reinitialisation of USB input devices:
OSD
1. Press
Ctrl+Num
(
default
) to open the OSD.
2. Select the row
Console setup
and press
Enter
.
3. Under
USB auto refresh
press
F8
to select one of the following options:
only faulty
 The status of the USB devices is monitored.
If communication to a USB device is interrupted, this
device is reinitialised (
default
).
all  The status of the USB devices is monitored.
If communication to one USB device is interrupted, all
devices are reinitialised.
off
 The status of the USB devices is
not
monitored.
If communication to a USB device is interrupted, the
device is
not
reinitialised.
4. Press
F2
to save your settings.