Initial configuration of the network settings
23
· G&D VisionXS-IP-F-DP-UHR
Checking the availability of a host in the network (Ping)
The OSD can be used to test the availability of a particular host (e. g., a computer or
a network device) in the network.
How to check the availability of a host in the network:
1. Use the
local hotkey
(
default
:
Alt
+
Num
) to open the local OSD of the
console module
or
use the
remote hotkey
(
default
:
Ctrl
+
Num
) to open the remote OSD of the
computer
module
. Select the entry
Network setup
and press
Enter
.
2. Select the entry
Ping host
and press
Enter
.
3. Use the
Host
entry to enter the IP address or the host name and press
Enter
.
4. The test results are displayed in the following table:
5. Press
Esc
to leave the menu.
Transmitted:
number of transmitted data packets
Received:
number of received data packets
Lost:
number of lost data packets
Min. RTT:
minimum round-trip-time
Avg. RTT:
average round-trip-time
Max. RTT:
maximum round-trip-time
NOTE:
A message informs the user if the host name cannot be resolved into an
IP address.
Summary of Contents for VisionXS-IP-F-DP-UHR
