Establishing a KVM-over-IP™ connection for the first time
33
· G&D VisionXS-IP-F-DP-UHR
Add, configuration and deletion of a remote target
How to add a new remote target:
1. Use the local hotkey
Alt
+
Num
to open the OSD of the console module.
2. Press
F11
to open the
Configuration
menu.
3. Select the entry
KVM Connection
and press
Enter
.
4. Select the entry
Remote target
and press
Enter
.
5. Press the
F3
key to create a new remote target.
6. Enter the following data:
7. Press
F2
to save your settings.
How to configure a remote target:
1. Use the local hotkey
Alt
+
Num
to open the OSD of the console module.
2. Press
F11
to open the
Configuration
menu.
3. Select the entry
KVM Connection
and press
Enter
.
4. Select the entry
Remote target
and press
Enter
.
5. Use the
arrow keys
to select the remote target to be configured and press the
F5
key.
Name:
Enter the name of the G&D remote station to be
displayed in the
Select
menu.
Hostname:
Enter the IP address/host name of the
G&D remote station.
NOTE:
In the
Hostname
field, you can use the key combination
Ctrl+F8
to open
the
Detected devices
dialog. This dialog shows you all unpaired remote stations
(computer modules and matrix switches).
Select the desired remote station and press
Enter
to apply the IP address of the
remote station.
Summary of Contents for VisionXS-IP-F-DP-UHR
