Installation
11
· G&D VisionXS-IP-F-DP-UHR
Establishing a connection to the Gigabit Ethernet
Transmission 1|Tx:
Insert the LC plug of a fibre optic cable, which is available as
accessory, into this interface. Connect the other end to the Gigabit Ethernet.
Transmission 1|Rx:
Insert the LC plug of a fibre optic cable, which is available as
accessory, into this interface. Connect the other end to the Gigabit Ethernet.
IMPORTANT:
The devices use components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE:
Remove the protection caps from the
Transmission
interfaces and from the
cable plug.
NOTE:
The activation of the
Transm. Redundancy
feature activates the
Transmission 2
interface.
To use the
Transmission 2
interface, you need an additional SFP transceiver.
Choose the right
SFP transceiver
for your variant of the
VisionXS-IP-F-DP-UHR
series.
The
Transm. Redundancy options
contain both, a corresponding
SFP transceiver
and the
Transm. Redundancy feature
.
Use this interface to establish a redundant
transmission
connection (
link aggregation
)
with the Gigabit network.
Transmission 1
Service
Pwr Main Power
Transmission 2
Red. Power
Network
Service
Pwr Main Power
Transmission 2
Red. Power
Network
Summary of Contents for VisionXS-IP-F-DP-UHR
