Configuration
G&D VisionXS-IP-F-DP-UHR ·
78
English
Selecting the EDID mode of the KVM extender
EDID information (
Extended Display Identification Data
) of a monitor informs the gra-
phics card of a connected computer about different technical device features. The
information is usually transmitted via Enhanced-DDC (
Enhanced Display Data Chan-
nel
) and without any alteration between KVM extender and computer.
Special GUD profiles are available for some resolutions. The names of these profiles
contain information about the preferred resolution that is sent to the computer's
video card when the profile is used.
As an alternative, you can use the web application
Config Panel
web application to
read the EDID profile of a monitor. The KVM extender will then transmit it to the
connected computer. For detailed information on this topic, refer to the separate
manual of the
Config Panel
web application.
How to select the EDID mode of KVM extenders:
NOTE:
For initial operation and when connecting another monitor, please follow
the activation sequence recommended on page 18.
OSD
1. Press
Ctrl+Num
(
default
) to open the OSD.
2. Select the row
Target setup
and press
Enter
.
3. Under
EDID mode
press
F8
to select one of the following options:
auto
automatic treatment of EDID data (
default
)
user
use of a G&D profile or a profile that has been read out via
web application
4. If the option
user
has been selected, select the row
Assign EDID
and press
Enter
.
Use the
arrow keys
to select the profile you want the activate and press
F8
.
Save your selection by pressing
F2
.
5. Press
F2
to save your settings.
Summary of Contents for VisionXS-IP-F-DP-UHR
