User module »DP-HR-U-CON-Fiber-DH«
159
· Target and user modules (DP-HR-U)
Required accessories
1 × Compatible optical fibre cable to connect the user module to a KVM matrix
switch of the
ControlCenter-Digital
series
Installation
Connecting console devices
DisplayPort Out 1:
Connect the first console monitor.
DisplayPort Out 2:
Connect the second console monitor.
Micro In:
Connect the console microphone (optional).
Speaker:
Connect the console speakers (optional).
Keyb.:
Connect the console’s PS/2 keyboard.
Mouse:
Connect the console’s PS/2 mouse.
Keyb./Mouse:
Connect the console’s USB keyboard and/or USB mouse.
Generic:
By default (
Keyb./Mouse
mode), you can use this interface to connect another
USB input device or supported displays or tablets.
Enable the
Generic HID
mode (see page 175 f.) if you want to connect another USB
input device. In this mode, data of the USB input device remains unaltered when
transmitted to the active target module.
USB Devices:
Connect any USB devices to these interfaces. The data stream of the
connected USB device is transmitted to a compatible target module with up to 16
Mbit/s.
NOTE:
Check the monitor's manuals if the OSDs provide a setting for the mode of
the DisplayPort input. If so, select the mode in which the image data is processed
according to the standard
DisplayPort 1.1
.
NOTE:
Console keyboard and console mouse can be connected to the user module’s
USB
or
PS/2 interfaces.
IMPORTANT:
With enabled
Generic HID
mode, it is
not
possible to operate the OSD
with a keyboard connected to the
Generic
socket.
Main P
ower
Red. Power
Micro In
DisplayPort
Out 1
Out 2
Transmission
LED Out
Keyb./Mouse
Speaker
Generic
Mouse
Keyb.
USB Devices
Summary of Contents for DP-HR-CON
Page 1: ...A9200141 1 30 G D Target and User Modules Installation and Operation DP HR U variants EN...
Page 194: ......
Page 195: ......
